Gustav Hensel 6100001, EAN: 4012591620013

Gustav Hensel KV 9118 enclosure 18 TE IP65

Installation > Distributor Cabinets > ISO - Distributor / housing, moisture

Gustav Hensel KV 9118 enclosure 18 TE IP65

Lieske Part No. 157234
Mfg Part No 6100001
EAN-Code 4012591620013
Manufacturer Gustav Hensel
Here only 133,85 EUR
159,28 EUR incl. VAT

Further information for Gustav Hensel KV 9118 enclosure 18 TE IP65

General
Degree of protectionIP65
Rated voltage400 V
Rated insulation voltage690 V a.c.
Protection classII
Rated current (terminal)75 A
Number of division units18 TE
Number of cable entries8
Sealing area for cable entry7 mm - 29 mm
Connection typescrewless terminal, screw connection
Conductor cross-section (plug terminal)1,5 mm² - 4 mm²
Conductor cross-section (screw connection)1,5 mm² - 25 mm²
MaterialPolystyrene
Filament test750 °C
UL 94V-2
Temperature resistance-25 °C to +80 °C
Application rangesurface-mounted, protected outdoor use
Ambient temperature-5 °C to +40 °C
Maximum ambient temperature (24 h)35 °C
Relative humidity≤ 50 % at 40 °C, ≤ 100 % at 25 °C
Compliance with standardsDIN EN 60670-1, DIN EN 60670-24
Scope of deliveryclosure plugs, mounting rails, cover strips, labelling strips, cable entry plate
Halogen freeJa
Silicone-freeJa
The Gustav Hensel small distributor type KV 9118 is an automation enclosure made of high-quality thermoplastic (polystyrene), designed for surface mounting in buildings as well as for protected outdoor applications. The enclosure features 18 mounting units (TE) and is designed for mounting devices with snap-in fastening on a DIN support rail (35 mm hat section). It is suitable for installing switching devices up to a rated current of 63 A. The integrated FIXCONNECT® technology provides N and PE terminals, ensuring secure and quick connections. The protection rating IP65 ensures dust-tight and splash-proof conditions, enabling use in outdoor environments under protected conditions. The transparent door allows visual inspection of installed components, while the integrated cable entry panel and cover strips ensure a neat and orderly installation.

Applications

The KV 9118 is intended for surface mounting in indoor spaces as well as in protected outdoor areas, for example on buildings or in technical rooms, where high mechanical and climatic resistance is required. The maximum ambient temperature is 35 °C over 24 hours, with an operating temperature range between -5 °C and +40 °C. The relative humidity must not exceed 50 % at 40 °C and 100 % at 25 °C. Installation must consider climatic influences such as solar radiation and temperature fluctuations to prevent condensation formation.

Functions and Equipment in Detail

The enclosure features an integrated cable entry with elastic sealing membranes designed for various conductor diameters. There are eight cable entries in total, with sealing ranges from 7 mm to 29 mm. The entries are positioned on the upper and lower walls of the enclosure. The integrated support rail enables mounting of switching devices with snap-in fastening. Additionally, sealing plugs, cover strips, and labeling strips are included in the delivery scope to ensure a neat and secure installation. The integrated accessory compartment provides space for small tools or documents.

Technology Explained Simply

The FIXCONNECT® technology for N and PE terminals enables quick and secure connection of conductors. The terminals are designed for various conductor cross-sections: push-in terminals for 1.5 mm² to 4 mm² (single-strand, fine-strand) and screw terminals for 1.5 mm² to 25 mm² (single-strand, multi-strand). The rated voltage is 400 V, and the rated insulation voltage is 690 V a.c. Protection class II means the device is double-insulated and does not require additional earthing. The materials are halogen-free and silicone-free, increasing safety in case of fire. The temperature resistance ranges from -25 °C to +80 °C, enabling broad application in various environments.

Compatibility and Accessories

Compatible accessories include the Hensel AKM 20 add-on cable gland IP67 with glow wire test (IEC 960°C), the ESM 20 insert gland IP55 M20 grey for pre-punched M20, the STM 20 step gland IP55 M20 for pre-punched M20 (sealing range D=5-16 mm), and the KV ES1 mounting lock for KV automation enclosures 12-54TE. These components can be used to extend cable entry or enhance enclosure security.

Mounting and Installation

Mounting is performed on a DIN support rail (35 mm hat section) using snap-in fastening. Cable entry is achieved via the integrated elastic sealing membranes, selected according to conductor diameter. After installation, the transparent door is closed, with cover strips and sealing plugs closing the openings. Installation must consider environmental conditions, particularly temperature, humidity, and solar radiation.

Operational Advantages

The KV 9118 offers high mechanical stability and protection rating IP65, making it suitable for use in humid or dusty environments. The integrated sealing membranes and transparent door simplify installation and maintenance. The FIXCONNECT® terminals enable quick and secure conductor connections. The halogen-free and silicone-free material composition increases safety in case of fire. The dimensions (height 333 mm, width 403 mm, depth 129 mm) and net weight of 2.505 kg are suitable for use in standardized installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/157234
qrcode für Gustav Hensel KV 9118 enclosure 18 TE IP65