Gustav Hensel 3900222, EAN: 4012591653042

Gustav Hensel K 1205 Junction Box 5-pole waterproof

Installation > Install Outlets and Accessories > Surface mounted junction boxes, waterproof

Gustav Hensel K 1205 Junction Box 5-pole waterproof

Lieske Part No. 279628
Mfg Part No 3900222
EAN-Code 4012591653042
Manufacturer Gustav Hensel
Here only 639,35 EUR
760,83 EUR incl. VAT

Further information for Gustav Hensel K 1205 Junction Box 5-pole waterproof

General
Rated insulation voltage690 V
Rated current250 A
Degree of protectionIP65
Impact strengthIK08
Number of clamp positions per pole2
Connection typeScrew connection
Tightening moment20 Nm
Minimum conductor cross-section16 mm²
Maximum conductor cross-section150 mm²
Conductor typeCopper, aluminium
Conductor shapesolid round, stranded round, solid sector, stranded sector
Cover attachmenttool lock
Application rangeprotected installation
Ambient temperature-25 to +40 °C
Maximum ambient temperature 24 h35 °C
Relative humidity≤ 50 % at 40 °C, ≤ 100 % at 25 °C
MaterialPolycarbonate
Temperature resistance material-25 to +80 °C
Filament test960 °C
UL 94V-2
Compliance with standardsDIN EN 60670-1/-22, IEC 60670-1/-22
Number of conduit inletsvarious variants with M20, M25, M32, M40, M50
Cable entry locationWall left+right, wall top+bottom
Number of terminals5-pole
Ferrule requiredJa
Sealable without accessoriesJa
Halogen freeJa
Silicone-freeJa
Conductor insertable from frontJa
The cable junction box K 1205 from Gustav Hensel is a robust, surface-mounted connection element for electrical wiring in buildings as well as for protected outdoor applications. It is made of high-quality thermoplastic, specifically polycarbonate, and is designed for connecting copper and aluminium conductors. The construction enables a secure and durable electrical connection with a rated insulation voltage of 690 V and a rated current of 250 A. The terminals are 5-pole and support conductor cross-sections from 16 mm² to 150 mm², with conductors inserted from the front into the terminal. The connection method is via screw connection, requiring a wire end ferrule for flexible conductors. The tightening torque for the terminal is 20 Nm.

Applications
The cable junction box is intended for surface installations in indoor environments as well as for protected outdoor applications, for example in industrial or commercial environments. It is designed for ambient temperatures from -25 °C to +40 °C, with relative humidity up to 50 % at 40 °C and up to 100 % at 25 °C. The maximum ambient temperature over 24 hours is 35 °C. The operating conditions comply with the requirements of DIN VDE 0100, Part 737.

Functions and Equipment in Detail
The box features multiple cable entries, implemented via metric pre-punchings. The number and position of the pre-punchings vary according to requirements: for example, there are three pre-punchings M40/M50 on the side panels, one pre-punching M32/M40 on the side and top/bottom panels, as well as various variants with M25, M20, and M40. The lid is secured via tool-locking, enabling a secure and tamper-proof installation. Without accessories, the box is tamper-proof, which is relevant for monitoring and security applications.

Technology Explained Simply
The protection rating IP65 ensures dust and splash water protection, enabling use outdoors under protected conditions. The impact resistance IK08 protects the housing against mechanical impacts. The material polycarbonate is halogen- and silicone-free, temperature-resistant from -25 °C to +80 °C, and meets the glow wire test according to IEC 60695-2-11 at 960 °C as well as UL 94 V-2. These properties ensure high safety and longevity.

Compatibility and Accessories
To extend connection options and adapt to different cable diameters, various accessories are available. These include mounting flanges such as Mi FM 60, Mi FM 63, Mi FM 40, Mi FM 50, and Mi FM 70, as well as cable inserts such as Mi FP 82 and Mi FP 70. Additionally, strain relief clamps (Mi ZE 62) and step bushings (STM 40) are available, facilitating cable installation. Combining these accessories enables flexible and secure cabling.

Mounting and Installation
Installation is surface-mounted, with securing via tool-locking. The positioning of cable entries on the walls and top/bottom panels allows flexible adaptation to the specific installation situation. The use of sealing plugs does not alter the specified protection rating.

Operational Advantages
The cable junction box K 1205 offers high mechanical and electrical reliability. The use of polycarbonate ensures long service life and resistance to environmental influences. The IP65 protection rating and IK08 impact resistance make it suitable for demanding operating conditions. The 5-pole design and support for copper and aluminium conductors up to 150 mm² expand its application possibilities in various fields. The tamper-proof construction supports the security and controllability of the installation.

Compliance with standards DIN EN 60670-1/-22 and IEC 60670-1/-22 ensures adherence to international standards. Dimensions are 450 mm (height) × 300 mm (width) × 170 mm (depth), net weight is 6.941 kg. The material properties and environmental conditions are designed such that the box can be used in a wide range of industrial and commercial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/279628
qrcode für Gustav Hensel K 1205 Junction Box 5-pole waterproof