| General |
| Degree of protection | IP55 |
| Pre-printing | M 25 |
| Sealing range | 9–17 mm |
| Colour | Grey |
| Product type | Insert terminal |
The ESM 25 insert bushing from Gustav Hensel is a component specifically designed for use in surface-mounted junction boxes, to be inserted into pre-punched holes with a diameter of M 25. It ensures secure and waterproof cable or conduit guidance through the box and enables proper installation in electrical systems. The construction is designed for a sealing range with a diameter of 9 to 17 mm, allowing flexible adaptation to various cable diameters. The bushing is available in grey and complies with protection class IP55, meaning it is dust-tight and protected against water jets from any direction – a feature that makes it particularly suitable for outdoor use or in damp indoor environments.
Insert Bushing
The ESM 25 is an insert bushing designed to be inserted into pre-formed holes (pre-punchings) with a size of M 25. This type of mounting allows for quick and secure installation without additional tools or fastening elements. The shape of the bushing is designed to fit precisely into the pre-punching, creating a tight seal with the junction box housing. The use of insert bushings is common in electrical installations to maintain the integrity of the protection class of the box, especially when cables are routed through it.
Protection Class IP55
The IP55 protection class specified for the ESM 25 means that the component is dust-tight (dust cannot enter the interior) and protected against water jets from any direction. This protection class is particularly important when the junction box is installed outdoors or in damp environments such as bathrooms, kitchens, or industrial facilities. The IP55 protection class ensures that the electrical installation remains safe and functional even under these conditions. Sealing is achieved by the bushing itself, which fits into the pre-punching and forms a tight seal.
Sealing Range Ø 9–17 mm
The ESM 25 is designed for a sealing range with a diameter of 9 to 17 mm. This range allows the bushing to be used with various cable diameters without requiring additional adapters or seals. The elastic sealing of the bushing ensures that even with different cable diameters within this range, a waterproof and dust-tight connection is achieved. The precise fit ensures that no gaps are created that could compromise the protection class.
Compatibility and Accessories
The ESM 25 insert bushing is specifically designed for junction boxes with pre-punchings of M 25. It is typically used in combination with surface-mounted junction boxes that also feature IP55 protection. Use in other boxes or with different pre-punching sizes is not intended and could impair the protective function.
Mounting and Installation
The installation of the ESM 25 is done by simply inserting it into the pre-formed hole (pre-punching) M 25 of the junction box. No additional tools or fastening elements are required. The elastic construction of the bushing ensures it securely anchors in the hole and creates a tight seal. The exact mounting instructions are not part of the source material; however, insert mounting is standard in the industry and does not require special knowledge.
Operational Advantages
The use of the ESM 25 provides a reliable and tight connection between cable and junction box during operation. The IP55 protection class ensures that the installation remains safe even under damp or dusty conditions. The tool-free installation reduces installation time and minimizes error sources. The fit for cable diameters from 9 to 17 mm offers flexibility in cable selection without requiring additional seals or adapters. The grey colour of the bushing harmonizes with most junction boxes and ensures a uniform appearance of the installation.