| General |
| Degree of protection | IP55 |
| Pre-printing | M 20 |
| Sealing range | 6-13 mm |
| Colour | Grey |
| Product type | Insert terminal |
The Gustav Hensel ESM 20 is an insert bushing, specifically designed for use in surface-mounted junction boxes with pre-punched M 20 fittings. It serves as a mechanical and electrical connection element for cables, particularly in installations requiring waterproof and dust-protected mounting. The bushing is suitable for use in outdoor installations or in damp indoor environments where a high degree of protection is required.
Applications
The ESM 20 is used in electrical installations where a secure and tight connection between the junction box and the connected cables is necessary. It is particularly suitable for applications in industry, commercial buildings, or residential structures where electrical wiring is installed in waterproof or dust-protected environments. Use in outdoor areas is possible due to the IP55 protection rating, which provides dust protection and protection against splashing water from any direction.
Functions and Features in Detail
The insert bushing allows for the secure fixation of cables with a diameter between 6 mm and 13 mm. Sealing is achieved via an elastic ring, which creates a tight connection between the bushing and the cable. The M 20 pre-punching enables easy and precise installation in corresponding pre-fabricated installation components. The grey colour matches the standard in electrical installations and ensures visual harmony with other components.
Technology Explained Simply
The IP55 protection rating means the component is dust-protected (dust cannot enter the interior) and protected against splashing water from any direction. This makes the ESM 20 suitable for use in damp or wet environments, such as kitchens, bathrooms, garages, or outdoors. The use of M 20 as a pre-punching enables standardized installation in junction boxes designed for this standard. The sealing range Ø 6–13 mm defines the range in which the cable can be securely and tightly fixed in the bushing.
Compatibility and Accessories
The ESM 20 is specifically developed for junction boxes with M 20 pre-punching. It is compatible with other components that also use the M 20 standard and can be used in combination with waterproof junction boxes to ensure a sealed and protection-compliant installation. Use in combination with other waterproof installation components enables a consistent protection rating across the entire system.
Installation and Mounting
Mounting is done by inserting the bushing into the pre-fabricated M 20 pre-punching of the junction box. The cable is passed through the bushing, where the elastic sealing ring creates a tight connection. Fixation is achieved by inserting the bushing into the pre-punching, with no additional fastening elements required. The installation is quick and does not require special tools.
Operational Advantages
The ESM 20 provides a reliable and tight connection, enhancing electrical safety. The IP55 protection rating ensures long service life even under challenging environmental conditions. Standardization of the M 20 pre-punching enables easy interchangeability and compatibility with other components. The simple installation reduces installation time and minimizes error sources.