| General |
| Product type | Small distribution board empty housing |
| Material | Thermoplastic |
| Degree of protection | IP 55 |
| Degree of protection designation | ESM |
| Mounting type | Surface mounted (plaster) |
| Cover | transparent, hinged |
| Lock | for tool actuation |
| Cable entry | via supplied cable glands |
The small distributor KG 9003 from Gustav Hensel is an empty enclosure made of high-quality thermoplastic, designed for surface mounting applications in buildings as well as for protected outdoor installations. The enclosure serves as a base for mounting electrical or electronic devices, which are installed using support rails or mounting plates as accessories. It features a transparent hinged lid, enabling visual inspection of the interior, and a lock that can only be operated with a tool, preventing unauthorized access. Cable entry is provided via included cable entries, ensuring secure and orderly wiring.
Small distributor units are commonly used in electrical installations to house small distribution units or controls in a compact enclosure. The KG 9003 is specifically designed for use in damp and outdoor environments, with protection rating IP 55 (ESM) providing sufficient protection against dust and splashing water. This protection rating makes the enclosure suitable for applications where some moisture or dampness may occur, but not for continuous immersion or heavy spray water exposure.
Applications include the installation of switching and control devices in industrial or commercial buildings, in outdoor areas with limited weather exposure, and in rooms with increased humidity such as kitchens, bathrooms, or laundry areas. The enclosure is not intended for use in explosive environments, as no corresponding approvals or protection categories are specified.
Functions and equipment in detail include integrated mounting functionality via support rails or mounting plates, enabling flexible and standardized installation. The transparent lid allows visual inspection of the interior without opening, which is advantageous during maintenance or inspections. The tool-operated lock enhances security and prevents accidental opening.
Technology explained simply shows that the enclosure is made of thermoplastic, a material known for its high mechanical stability, weather resistance, and electrical insulation properties. The protection rating IP 55 means the enclosure is protected against dust (dust-tight) and splashing water (from all directions), making it suitable for outdoor use or damp indoor environments. The designation ESM (individual bushing mounting) refers to the type of cable entry, which is achieved via individual, mountable bushings.
Compatibility and accessories include suitable cable entries that can be directly mounted on the enclosure. Recommended accessories include, for example, the Hensel ESM 20 insert bushing IP55 M20 grey, suitable for pre-drilled M20, and the Hensel STM 20 stepped bushing IP55 M20, designed for sealing diameters of 5–16 mm. Other options are the Hensel STM 40 stepped bushing IP55 M40 for sealing diameters of 13–34 mm, and the Hensel AKM 20 add-on cable bushing IP67, which meets the glow wire test according to IEC 960°C. These accessories enable adaptable and secure cable entry depending on cable diameter and environmental conditions.
Mounting and installation is carried out using surface mounting techniques, where the enclosure is attached to a wall or base structure. The installation dimensions are 182 mm (width) × 205 mm (height) × 95 mm (depth), with the notation “m.MPL” indicating the mounting plate length. Mounting is performed using the integrated fastening options, designed for use with support rails or mounting plates.
Operational advantages lie in the combination of robust material, high protection rating, and flexible mounting. The enclosure provides reliable protection for installed devices that need to be shielded from dust and splashing water. The tool-operated lock increases security, and the transparent cover facilitates inspection. The use of suitable cable entries ensures a tight and orderly wiring, promoting long-term stability of the installation. The installation dimensions are standardized, ensuring compatibility with common mounting plates and support rails.