Further information for Gustav Hensel Mi 6465 Disconnect Switch Enclosure 4x3xNH00
General
Rated voltage
690 V
Rated insulation voltage
690 V a.c.
Protection class
II
Rated current (device)
160 A
Rated current (circuit)
128 A
Rated current (busbar)
250 A
Rated short-time withstand current
15 kA / 1 s
Rated impulse withstand current
30 kA
Number of devices
4
Connection direction
Above
Busbar polarity
5
Busbar centre distance
60 mm
IP protection rating
IP65
Impact strength
IK08
Application range
protected installation
Maximum ambient temperature 24 h
35 °C
Ambient temperature
-5 to +40 °C
Relative humidity
≤ 50 % at 40 °C, ≤ 100 % at 25 °C
Material
Polycarbonate
Filament test
960 °C
Power dissipation capability
1.9 W / 1 K
Cover colour
smoke topaz
Colour of lower part
Grey
Compliance with standards
DIN EN IEC 61439-2
Reversible connection direction
UV resistant
Halogen free
Silicone-free
The fuse switch disconnector enclosure Mi 6465 from Gustav Hensel is an installation switching device for use in energy switching device combinations up to 630 A or as a single enclosure. It is designed for safe electrical distribution and switching in industrial and commercial installations. The enclosure is made of high-quality polycarbonate, which is impact-resistant, UV-resistant, halogen-free, and silicone-free. The materials pass the glow wire test according to IEC 60695-2-11 at 960 °C, ensuring high fire protection safety. The protection rating IP65 provides dust-tight and splash-proof conditions, making the device suitable for outdoor use, provided climatic influences are considered. The impact resistance IK08 offers additional mechanical protection against external influences.
Applications include the distribution of electrical energy in industrial plants, commercial buildings, damp rooms, and outdoor installations under protected conditions. The enclosure is designed for wall mounting and can be secured using external brackets or mounting rails. Cable entry is possible on all enclosure walls via metric pre-punchings or mounting flanges, ensuring flexible and secure cabling. The wall penetrations are equipped with large openings to enable electrical connections between multiple enclosures.
Functions and equipment in detail include the integration of four 3-pole fuse switch disconnectors NH 00, mounted on busbars according to IEC 60947-3. The busbar has a rated current of 250 A, while the device itself has a rated current of 160 A. The rated voltage is 690 V, with a rated insulation voltage of 690 V AC and 1000 V DC. The rated short-time withstand current is 15 kA/1 s, and the rated peak withstand current is 30 kA. The device is equipped with PE- and N-terminals as well as additional shock protection behind the cover. The connection direction is adjustable, allowing flexible installation at different locations. The cover closures are designed for tool operation, ensuring safe and controlled operation.
Technology explained simply shows that the enclosure is designed for mounting fuse switch disconnectors on a 5-pole busbar. The busbar center spacing is 60 mm. The terminals are designed for various conductor cross-sections: for single-core, multi-core, and fine-strand copper conductors from 1.5 mm² to 70 mm². The connection method is via frame terminals, with the maximum number of conductors per terminal point varying depending on the conductor type.
Compatibility and accessories include various mounting components suitable for expanding and adapting the enclosure. These include mounting flanges such as Mi FM 32, Mi FM 50, Mi FM 60, Mi FM 63, as well as mounting flanges with cable routing space. Wall seals such as Mi WD2, step bushings such as STM 20 and STM 40, and insert bushings such as ESM 20 and ESM 25 enable flexible cable entry. Busbar connectors such as Mi SV 63 and direct connection terminals such as KS 16Z, KS 16F, KS 35Z, and KS 35F support the connection of busbars. Mounting rails such as Mi MS2 and sealing caps such as Mi PL2 serve secure mounting and identification.
Mounting and installation is carried out on a wall, with fixation possible via external brackets (e.g. Mi AL40) or mounting rails (e.g. Mi MS2). Cable entry is via the provided metric pre-punchings or via mounting flanges, which can be selected according to requirements. The connection direction can be changed as needed, enabling flexible integration into existing installations. The tool-operated cover locking mechanism ensures safe and accessible operation.
Operational advantages include high mechanical and electrical safety, easy installation, and flexibility in cabling. The use of polycarbonate ensures long service life and resistance to UV radiation and mechanical stress. The IP65 protection rating allows use in damp and dusty environments. The integrated PE- and N-terminals as well as the shock protection increase safety for the operator. The modular design with compatible accessories allows individual adaptation to specific requirements.
The device complies with the standard DIN EN IEC 61439-2 and is intended for use in protected installations. The ambient temperature may range from -5 °C to +40 °C, with the maximum ambient temperature over 24 hours being 35 °C. The relative humidity may be up to 50 % at 40 °C and up to 100 % at 25 °C. The dimensions of the enclosure are 300 mm height, 600 mm width, and 170 mm depth. The net weight is 10.572 kg. The cover color is smoke topaz, and the lower part is gray. The heat dissipation capacity is 1.9 W per 1 K temperature difference.
Key terms in the text: fuse switch disconnector enclosure, polycarbonate, IP65, IEC 61439-2, busbar, NH00.