Further information for Gustav Hensel Mi 6436 NH Fuse Disconnect Switch Enclosure 3x3xNH00
General
Rated voltage
690 V
Rated insulation voltage
690 V a.c.
Protection class
II
Rated current (device)
160 A
Rated current (circuit)
128 A
Rated current (busbar)
250 A
Rated short-time withstand current
15 kA / 1 s
Rated impulse withstand current
30 kA
Number of devices
3
Connection direction (exit)
Top
Degree of protection
IP65
Impact strength
IK08
Application range
Protected installation
Maximum ambient temperature (24 h)
35 °C
Ambient temperature
-5 to +40 °C
Relative humidity
≤ 50 % at 40 °C, ≤ 100 % at 25 °C
Material
Polycarbonate
Filament test
960 °C
Cover colour
smoke topaz
Colour of lower part
Grey
Compliance with standards
DIN EN IEC 61439-2
Busbar polarity
5
Busbar centre distance
60 mm
Cover attachment
tool lock
Touch protection
behind the housing cover
Reversible connection direction
UV resistant
Halogen free
Silicone-free
Combination possible
The housing of type Mi 6436 from Gustav Hensel is a fuse switch disconnector housing for use in energy switching device combinations up to 630 A or as a single housing. It is made of high-quality polycarbonate and features a protective insulation design, ensuring safe and reliable installation. The housing is designed for wall mounting and allows mounting via external brackets or mounting rails, enabling flexible fastening to various substrates. Cable entry is provided on all housing walls through metric pre-punchings or via add-on flanges, enabling versatile and adaptable cabling. The wall penetrations are equipped with large openings to facilitate electrical connections between multiple housings.
Applications include installation in protected indoor areas as well as in damp rooms, taking into account environmental conditions such as temperature and humidity. The housing is designed for an ambient temperature range of -5 °C to +40 °C, with a maximum temperature over 24 hours of 35 °C. The relative humidity must not exceed 50 % at 40 °C and 100 % at 25 °C. The protection rating IP65 ensures dust and splash water protection, making it suitable for use in damp or slightly contaminated environments. The impact resistance IK08 provides additional mechanical protection against external influences.
Functions and equipment in detail include the integration of 3x fuse switch disconnectors NH00, 3-pole, mounted on a 5-pole busbar. The busbar has a rated current of 250 A and is designed for a rated voltage of 690 V. The device itself has a rated current of 160 A, with the circuit for thermal testing according to DIN EN IEC 61439-1 dimensioned at 128 A. The rated short-time withstand current is 15 kA/1 s and the rated peak withstand current is 30 kA, ensuring high electrical load capacity. The outgoing connection direction is adjustable and is standardly oriented upwards, enabling flexible installation.
Technology explained simply shows that the housing is equipped with supply terminals, PE and N terminals, and shock protection. The shock protection is located behind the housing cover and increases safety during maintenance work. The cover fastening is achieved via a tool-locking mechanism, ensuring a secure and lockable cover. The busbar center spacing is 60 mm, enabling standardized mounting. The busbar polarity is 5-pole, facilitating connection with other devices and switchgear. The housing is combining-capable, allowing multiple units to be assembled into larger switchgear installations.
Compatibility and accessories include various add-on flanges such as Mi FP 38, Mi FM 32, Mi FM 40, or Mi FM 63, which can be used depending on requirements for cable entry or mounting. Additionally, insert bushings such as ESM 20 or ESM 25, step bushings such as STM 20 or STM 40, and wall seals such as Mi WD2 are available. For mounting, external brackets (Mi AL40) and mounting rails (Mi MS2) are provided. The busbar terminals such as KS 120Z, KS 120F, KS 35F, or KS 16F enable direct connection to conductors of different cross-sections. The sealing caps (Mi PL2) serve for sealing and documentation of the installation.
Mounting and installation are carried out via the designated mounting points on the housing. Cable entry is via metric pre-punchings or add-on flanges, with wall penetrations enabling easy connection between multiple housings. Mounting via external brackets or mounting rails offers flexibility in fastening to walls or other supports. The connection direction can be adjusted according to requirements, facilitating installation in different spatial conditions.
Operational advantages lie in the high safety provided by the protective insulation design, tool-locking mechanism, and shock protection. The combinability allows expansion of the switchgear, while the adjustable connection direction ensures flexible installation. The IP65 protection rating and IK08 impact resistance increase reliability in various operating environments. Compliance with DIN EN IEC 61439-2 ensures that the device meets the requirements for low-voltage switching device combinations.
The housing has dimensions of height 300 mm, width 600 mm, depth 170 mm and a net weight of 10.146 kg. The cover color is smoky topaz, and the lower part is gray. The materials are halogen-free and silicone-free, increasing environmental compatibility. The glow wire test according to IEC 60695-2-11 at 960 °C and UV resistance according to DIN EN IEC 61439-1 ensure long service life even under UV radiation exposure.