Further information for Gustav Hensel Mi 1448 Distribution Box 48TE
General
Degree of protection
IP65
Impact strength
IK08
Rated insulation voltage
690 V a.c.
Rated current of clamp
75 A
Number of possible N-potentials
4
Number of modular spacings
48 TE
Number of rows
4
Conduit spacing
125 mm
Clamp tightening torque
2 Nm
Maximum ambient temperature (24 h)
35 °C
Ambient temperature
-5 to +40 °C
Relative humidity
≤ 50 % at 40 °C, ≤ 100 % at 25 °C
Material
Polycarbonate
Filament test
960 °C
Cover colour
smoke topaz
Lower part colour
Grey
Cover attachment
Hand lock
Power dissipation capability
1,9 W/K
Protection class
II
Compliance with standards
DIN EN IEC 61439-2
UV resistant
Halogen free
Silicone-free
The automaton housing Mi 1448 from Gustav Hensel is a distribution housing designed for use in energy switching device combinations up to 630 A or as a standalone housing. It is intended for mounting row-mounted devices according to DIN 43880 and provides a structured, secure installation of electrical components. The housing is made of polycarbonate, a high-quality, impact-resistant plastic that is UV-resistant, halogen-free, and silicone-free. The material properties include a glow wire test according to IEC 60695-2-11 at 960 °C, highlighting its fire behaviour tolerance. The colour scheme features a grey lower section and a transparent lid in smoke topaz, enabling visual inspection of the interior. The lid is secured using manual latches, allowing tool-free operation.
Applications include protected indoor installations as well as suitable outdoor applications, taking into account climatic conditions such as temperature and humidity. The housing is designed for an ambient temperature range of -5 °C to +40 °C, with a maximum 24-hour temperature of 35 °C. The relative humidity must not exceed 50 % at 40 °C and 100 % at 25 °C. The protection rating IP65 ensures dust-tight and splash-proof coverage, making it suitable for humid environments. The impact resistance corresponds to class IK08, providing high mechanical protection.
Functions and equipment in detail include a FIXCONNECT®-N and PE terminal, ensuring secure connection of neutral and protective conductors. The terminals are designed for copper conductors, with the maximum number of conductors per terminal point varying by cross-section: up to 4 conductors with 1.5 to 2.5 mm², 3 conductors with 4 to 6 mm², 1 conductor with 10 mm² or 16 to 25 mm². The rated current of the terminal is 75 A. The N terminal is separable, allowing different potentials. The housing offers 48 division units (TE) in a 4-row arrangement with 12 TE per row (18 mm width). The support rail spacing is 125 mm.
Technology explained simply shows that the housing is designed for mounting switching devices according to DIN 43880. Cable entry is provided on all housing walls via metric pre-punchings or via optional add-on flanges. The wall penetrations are equipped with large openings to facilitate electrical connections between multiple housings. The rated insulation voltage is 690 V AC and 1000 V DC. Protection class II (double insulated) ensures safe operation without additional earthing. The maximum power loss dissipation is 1.9 W per K temperature difference.
Compatibility and accessories include a wide range of compatible components that can be used to extend and adapt the housing. These include add-on flanges such as Mi FP 38, Mi FM 32, Mi FM 25, Mi FM 40, Mi FM 50, Mi FM 60, Mi FM 63, Mi FP 20, as well as wall seals (Mi WD2), step bushings (STM 20, STM 40), insert bushings (ESM 20, ESM 25), add-on cable bushings (AKM 20), main circuit branch terminals (KKL 54), mounting rails (Mi MS2), external brackets (Mi AL40), and sealing caps (Mi PL2). These elements enable flexible and secure integration into existing or new installations.
Mounting and installation is performed via wall mounting, with the option to use external brackets or mounting rails. Cable entry is via the pre-defined pre-punchings or via additional add-on flanges. The mounting is designed to be carried out without tools or special aids, with the manual latches for the lid enabling easy operation.
Operational advantages lie in high mechanical and electrical safety, simple mounting, and flexibility in adapting to different requirements. The use of polycarbonate ensures long service life and resistance to environmental influences. The integrated terminals and the separable N terminal simplify installation and maintenance. The transparent cover allows quick visual inspection of the interior without opening the lid. Conformity with DIN EN IEC 61439-2 ensures compliance with relevant safety and quality standards.
The housing has dimensions of 600 mm (height) × 300 mm (width) × 170 mm (depth) and weighs 4.85 kg. Use in protected installations is intended, taking into account environmental conditions such as temperature and humidity. The combinability with other modules enables a scalable solution for different applications.