Further information for Gustav Hensel Mi 1112 Distribution Box 12 TE
General
Degree of protection
IP65
Impact strength
IK08
Rated insulation voltage
690 V a.c.
Protection class
II
Connection cross section
16 mm²
Number of terminals per pole
10
Conductor type
Cu
Width in number of modular spacings
12 TE
Number of rows
1
Material
Polycarbonate
Filament test
960 °C
Cover colour
smoke topaz
Lower part colour
Grey
Power dissipation capability
0,6 W/K
Application range
Protected installation
Maximum ambient temperature 24 h
35 °C
Ambient temperature
-5 to +40 °C
Relative humidity
≤ 50 % at 40 °C, ≤ 100 % at 25 °C
Compliance with standards
DIN EN IEC 61439-2
UV resistant
Halogen free
Silicone-free
The Automatengehäuse Mi 1112 from Gustav Hensel is a protection-insulated housing for use in energy switching device combinations up to 630 A or as a single housing. It is designed for mounting row-mounted devices according to DIN 43880 and intended for use in protected installations. The housing is made of high-quality polycarbonate, which is UV-resistant, halogen-free, and silicone-free, and offers high mechanical strength. The protection rating IP65 ensures dust-tight and splash-proof protection, making it suitable for outdoor use, provided climatic influences are considered. The impact resistance is IK08, indicating high resistance to mechanical stress.
Applications
The housing is intended for use in low-voltage installations in the field of energy distribution. It is suitable for mounting switching devices, fuses, power switches, and other row-mounted devices. The design allows combination with other housings, enabling the construction of complex switching systems. Wall penetrations with large openings facilitate electrical connections between multiple housings. Cable entry is possible on all housing walls via metric pre-punchings or mounting flanges, enabling flexible installation.
Functions and Equipment in Detail
The housing features 12 division units (TE) in a row, with each TE being 18 mm wide. It is equipped with PE and N terminals designed for copper conductors with a cross-section of 16 mm². The terminals are screw-type connections, with 10 connection points available per pole. The terminals are designed for conductors with a cross-section of 16 mm². The lid is transparent and made of smoke topaz, enabling visual inspection of devices inside. The lid closures are designed for manual operation.
Technology Explained Simply
The rated insulation voltage is 690 V AC and 1000 V DC, ensuring electrical safety when used in low-voltage installations. Protection class II means the device is protection-insulated, requiring no protective earth connection. Material properties, particularly the glow wire test according to IEC 60695-2-11 at 960 °C, demonstrate the high fire resistance of the polycarbonate. The maximum water absorption of 10 mg according to DIN 53473 highlights the low moisture absorption of the material. The ambient temperature range is between -5 °C and +40 °C, with relative humidity up to 50 % at 40 °C and up to 100 % at 25 °C.
Compatibility and Accessories
The housing can be combined with various accessories to extend installation and functionality. These include mounting flanges such as Mi FM 60, Mi FM 25, Mi FM 63, Mi FM 50, Mi FM 40, Mi FM 32, Mi FP 20, Mi FP 38, as well as step bushings such as STM 20 and STM 40. For cable entry, insert bushings such as ESM 25 and ESM 20 are also available. Wall seals such as Mi WD2 and mounting rails such as Mi MS2 enable flexible mounting. Compatibility with other housings is provided, allowing modular systems to be built.
Mounting and Installation
Mounting is done on the wall, with fastening possible via external lugs (e.g. Mi AL40) or mounting rails (e.g. Mi MS2). Cable entry is via metric pre-punchings on the housing walls or via mounting flanges. The large openings in the wall penetrations facilitate cabling between multiple housings. The transparent lid cover allows visual inspection of devices inside without opening the housing.
t Operational Advantages
The housing provides high mechanical and electrical safety due to the IP65 protection rating and protection class II. The use of polycarbonate ensures high UV and fire resistance. Integrated PE and N terminals, as well as cover and labeling strips, simplify installation and maintenance. The modular design enables flexible expansion of the system. Manual closures on the lid ensure safe and easy operation.
Dimensions and Weight
The housing has a height of 150 mm, a width of 300 mm, and a depth of 170 mm. The net weight is 1.692 kg. The color of the lower part is gray, and the lid is transparent in smoke topaz color.
Compliance with Standards
The product complies with DIN EN IEC 61439-2, which applies to insulated low-voltage switching device combinations in box construction. The approval also includes requirements for protection rating IP65 and impact resistance IK08.
Power Loss Dissipation
The dissipated power loss is 0.6 W per K temperature difference, describing the thermal load capacity of the housing.