Gustav Hensel 2000154, EAN: 4012591651543

Gustav Hensel Mi 4150 fuse enclosure 1xNH00 3-pole

Installation > Distributor Cabinets > ISO - Distributor / housing, moisture

Gustav Hensel Mi 4150 fuse enclosure 1xNH00 3-pole

Lieske Part No. 114081
Mfg Part No 2000154
EAN-Code 4012591651543
Manufacturer Gustav Hensel
Here only 214,51 EUR
255,27 EUR incl. VAT

Further information for Gustav Hensel Mi 4150 fuse enclosure 1xNH00 3-pole

General
Degree of protectionIP65
Impact strengthIK08
Rated voltage690 V
Rated insulation voltage690 V (AC)
Rated current (device)160 A
Rated current (circuit)128 A
Rated current (terminal)192 A
Rated short-circuit current50 kA
Protection classII
MaterialPolycarbonate
Filament test960 °C
Connection typeScrew connection
Connection directiontop or bottom
Maximum number of conductors per terminal1, 2, 4, 6
Minimum conductor cross-section1,5 mm²
Maximum conductor cross-section70 mm²
Conductor typestranded, fine-stranded round
Conductor materialCu
Cover locktool actuation
Cable entrymetric pre-mouldings or mounting flanges
Wall mountingExternal lugs or mounting rails
Fuse compartmentNH 00, 3-pole
PE and N terminalsfor copper conductors
Application rangeprotected installation, suitable for outdoor use
Ambient temperature-5 °C to +40 °C
Maximum ambient temperature 24 h35 °C
Relative humidity≤ 50 % at 40 °C, ≤ 100 % at 25 °C
Power dissipation per pole4,2 W
Power dissipation capability0,6 W/K
Cover coloursmoky topaz (transparent)
Colour of lower partGrey
Compliance with standardsDIN EN IEC 61439-2
UV resistantYes
Halogen freeYes
Silicone-freeYes
The fuse housing Mi 4150 from Gustav Hensel is an insulating material-encapsulated low-voltage switching device combination in box construction, designed for use in energy switching device combinations up to 630 A or as a single housing. It is intended for mounting NH fuse subassemblies and is designed for wall mounting. The housing is made of high-quality polycarbonate, which is halogen-free, silicone-free, and UV-resistant, and provides protective insulation (protection class II). The cover color is smoke topaz (transparent), while the lower part is in grey. The cover closures are designed for tool operation, ensuring secure and controlled operation.

Applications include installation in protected indoor areas as well as outdoors, taking into account climatic influences on the operating equipment. The housing is designed for an ambient temperature of -5 °C to +40 °C, with a maximum 24-hour temperature of 35 °C. The relative humidity is up to 50 % at 40 °C and up to 100 % at 25 °C. The protection rating IP65 according to IEC 60529 protects against dust and water jets, making it suitable for outdoor use. The impact resistance IK08 ensures high mechanical stability against external influences.

Functions and equipment in detail include a 3-pole NH 00 fuse subassembly according to IEC 60269, mounted on a mounting plate. It features PE and N terminals for copper conductors, with the connection type being screw connection. The maximum number of conductors per terminal is 1, 2, 4, or 6, depending on the conductor cross-section, which ranges from 1.5 mm² to 70 mm². The connection direction of the outgoing cable is possible top or bottom. The cable entry is provided on all housing walls via metric pre-punchings or mounting flanges, enabling flexible and secure interconnection between housings. Wall mounting is possible using external lugs or mounting rails.

Technology explained simply shows that the housing is designed for a rated voltage of 690 V, with a rated insulation voltage of 690 V (AC) and 1000 V (DC). The rated current of the device is 160 A, while the rated current of a circuit is 128 A. The rated current of the terminal is 192 A. The conditional rated short-circuit current is 50 kA, ensuring safety under short-circuit loads. The power loss per pole is 4.2 W, and the power loss dissipation capacity is 0.6 W per Kelvin temperature difference.

Compatibility and accessories include the possibility to combine the housing with other modules, as it is combining-capable. Suitable accessories include the Hensel AKM 20 mounting cable gland IP67, which meets the glow wire test according to IEC 960°C. The glow wire test of the housing itself is 960 °C, confirming the flammability test according to IEC 60695-2-11. The maximum water absorption is 10 mg according to DIN 53473, highlighting the material quality.

Mounting and installation is done via wall mounting using external lugs or mounting rails. The dimensions are 300 mm (height) × 150 mm (width) × 170 mm (depth), and the net weight is 2.822 kg. The connection cross-sections are designed for various conductor cross-sections, with the maximum number of conductors per terminal varying depending on the cross-section. The connection type is screw connection, and no wire end ferrule is required for flexible conductors.

Operational advantages include high mechanical and thermal stability, secure insulation, flexible mounting and cabling options, and suitability for outdoor use. The UV resistance and halogen-free materials increase service life and safety. Compliance with DIN EN IEC 61439-2 ensures adherence to international standards for low-voltage switching devices. The transparent cover allows visual inspection of the interior without opening.

The housing is suitable for use in humid rooms, with protection rating IP65 and water absorption of 10 mg ensuring functionality under humid conditions. The flame behavior test (glow wire test 960 °C) and UV resistance increase reliability in demanding environments. The combining capability with other modules enables flexible expansion of the switching system.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/114081
qrcode für Gustav Hensel Mi 4150 fuse enclosure 1xNH00 3-pole