Gustav Hensel 20001390, EAN: 4012591127352

Gustav Hensel Mi 6480 Disconnect Switch Enclosure 5-pole

Installation > Distributor Cabinets > ISO - Distributor / housing, moisture

Gustav Hensel Mi 6480 Disconnect Switch Enclosure 5-pole

Lieske Part No. 147772
Mfg Part No 20001390
EAN-Code 4012591127352
Manufacturer Gustav Hensel
Here only 1.046,90 EUR
1.245,81 EUR incl. VAT

Further information for Gustav Hensel Mi 6480 Disconnect Switch Enclosure 5-pole

General
Degree of protectionIP65
Impact strengthIK08
Protection classII
Rated voltage690 V
Rated insulation voltage690 V a.c.
Rated current of device250 A
Rated current of busbar250 A
Rated current of circuit200 A
Rated impulse withstand current30 kA
Rated short-time withstand current15 kA / 1 s
Connection directionadjustable
Connection typebolted connection M 10
Busbar polarity5
Busbar centre distance60 mm
MaterialPolycarbonate
Filament test960 °C
Cover coloursmoke topaz
Lower part colourGrey
Device power loss per pole8,7 W
Installed power loss of busbar12,81 W
Dissipatable power loss1,9 W / K
UV resistantYes
Halogen freeYes
Silicone-freeYes
The housing of type Mi 6480 from Gustav Hensel is a fuse switch disconnector housing for use in energy switching device combinations up to 630 A or as a single housing. It is made of high-quality polycarbonate and provides protective insulation (protection class II), ensuring additional safety during installation. The housing is designed for wall mounting and can be fixed using external lugs or mounting rails. Cable entry is possible on all housing walls via metric pre-punchings or via mounting flanges, enabling flexible and secure cabling. The wall penetrations are equipped with large openings to facilitate electrical connections between multiple housings.

Applications include use in protected indoor areas and damp rooms, where the protection rating IP65 ensures high resistance against dust and water. The impact resistance according to IK08 makes the housing robust against mechanical stresses. The maximum ambient temperature is 35 °C over 24 hours, with an operating temperature range between -5 °C and +40 °C. The relative humidity must not exceed 50 % at 40 °C and 100 % at 25 °C. The housing is intended for use in protected installations, taking into account climatic influences on the operating equipment.

Functions and equipment in detail include the integration of a 3-pole fuse switch disconnector NH 1, mounted on 5-pole busbars. The rated current of the device is 250 A, with the busbar rated current also being 250 A. The rated voltage is 690 V, and the rated insulation voltage is 690 V AC and 1000 V DC. The device features PE and N terminals as well as a detachable bridge between PE and N, enabling flexible electrical connections. The connection direction is adjustable, allowing flexible mounting at different positions within the distribution box. The lid closures are designed for tool operation, ensuring secure and controlled opening.

Technology explained simply shows that the housing is designed for mounting fuse switch disconnectors, which are used in low-voltage installations for protecting and disconnecting electrical circuits. The busbars are 5-pole with a center spacing of 60 mm. The rated short-time withstand current is 15 kA for 1 second (short-time current withstand) and 30 kA for the peak current (Ipk). The material properties of polycarbonate include a glow wire test according to IEC 60695-2-11 at 960 °C, confirming fire resistance. The material is UV-resistant, halogen-free, and silicone-free, ensuring long-term stability and environmental compatibility. The maximum water absorption is 10 mg according to DIN 53473.

Compatibility and accessories include the use of mounting flanges such as Mi FP 38, Mi FP 20, Mi FP 72, Mi FP 70, Mi FP 82, as well as mounting flanges with various pre-punchings like Mi FM 25, Mi FM 32, Mi FM 40, Mi FM 50, Mi FM 60. Additional compatible components include insert bushings ESM 20 and ESM 25, step bushings STM 20 and STM 40, strain relief clamps Mi ZE 62, wall seals Mi WD2, sealing caps Mi PL2, mounting cable bushings AKM 20, and mounting rails Mi MS2. These elements allow individual adaptation of cable entry and mounting to specific requirements.

Mounting and installation is carried out on the wall, with fixation possible via external lugs or mounting rails. Cable entry is via the pre-defined punchings or additional mounting flanges. The connection direction is adjustable, enabling flexible integration into existing distribution systems. The lid closures require tools for operation, ensuring safe and controlled handling. Connection between housings is achieved via the large wall penetrations.

Operational advantages lie in high mechanical and electrical stability, easy mounting, and flexible adaptation to various requirements. The protection rating IP65 and impact resistance IK08 ensure high reliability in various operating environments. The use of polycarbonate ensures long service life and resistance to environmental influences. The integrated PE and N terminals with a detachable bridge enable flexible and secure electrical connections. The adjustable connection direction allows flexible mounting at different positions within the distribution box.

The dimensions of the housing are 600 mm height, 300 mm width, and 170 mm depth. The net weight is 8.047 kg. The lid color is Smoky Topaz, and the lower part is Grey. Conformity to standards is according to DIN EN IEC 61439-2. The power loss of the device is 8.7 W per pole, and the installed power loss of the busbar is 12.81 W. The radiated power loss is 1.9 W per Kelvin temperature difference.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/147772
qrcode für Gustav Hensel Mi 6480 Disconnect Switch Enclosure 5-pole