Further information for Gustav Hensel Mi 2300 meter enclosure 300x450x170 mm
General
Degree of protection
IP65
Impact strength
IK08
Protection class
II
Rated insulation voltage
690 V a.c.
Material
Polycarbonate
Filament test
960 °C
Maximum ambient temperature 24 h
35 °C
Ambient temperature
-5 to +40 °C
Relative humidity
≤ 50 % at 40 °C, ≤ 100 % at 25 °C
Built-in depth
146 mm
Cover colour
smoke topaz
Lower part colour
Grey
Cover lock
tool actuation
Sealable
double
Meter positions
1
Meter mounting
included
Compliance with standards
DIN EN IEC 61439-2
UV resistant
Halogen free
Silicone-free
Combination possible
The meter housing Mi 2300 from Gustav Hensel is a protection-insulated housing made of high-quality polycarbonate, designed for use in energy switching device combinations up to 630 A or as a single housing. It is intended for mounting and protection of a meter with three-point fixation and is equipped with integrated meter mounting. The construction allows for flexible wall mounting, with fixation possible via external brackets or mounting rails. The maximum installation depth is 146 mm, providing sufficient space for component installation within the housing. The housing is intended for protected installations, with outdoor use in unmeasured areas possible upon agreement with the local network operator.
Applications
The housing is suitable for indoor use and for outdoor use, provided climatic influences on the operating equipment are considered. It is particularly designed for applications in low-voltage distribution and measurement, where high mechanical and electrical safety is required. Use in damp rooms is possible, as the housing has a protection rating of IP65, which is dust-tight and splash-proof. The impact resistance according to IK08 ensures high mechanical stability against external influences.
Functions and Equipment in Detail
The housing features cable entries on all walls, implemented via metric pre-punchings or mounting flanges. This enables flexible and secure cabling, even when connecting multiple housings together. The wall penetrations are equipped with large openings to facilitate electrical connections. The lid closures are designed for tool operation and are double-sealable, ensuring secure and controlled accessibility. The lid color is smoke topaz, while the lower part is gray.
Technology Explained Simply
The housing is made of polycarbonate, a high-quality plastic that is UV-resistant, halogen-free, and silicone-free. The glow wire test according to IEC 60695-2-11 at 960 °C demonstrates the high fire protection performance of the material. Protection class II means the device is protection-insulated and does not require additional protective measures such as earthing. The rated insulation voltage is 690 V AC and 1000 V DC, ensuring suitability for low-voltage installations. The maximum ambient temperature is 35 °C over 24 hours, with operating temperature ranging from -5 °C to +40 °C. Relative humidity must not exceed 50 % at 40 °C and 100 % at 25 °C.
Compatibility and Accessories
The housing is combinable with other modules of the Mi series. Suitable accessories include the external brackets Hensel Mi AL40 for external mounting and the mounting cable gland Hensel AKM 20 with IP67 protection rating and glow wire test according to IEC 960°C. These components enable extended mounting and cabling flexibility.
Mounting and Installation
Mounting is done on walls, with fixation options via external brackets or mounting rails. The maximum installation depth of 146 mm allows for component installation within the housing. Dimensions are 450 mm height, 300 mm width, and 170 mm depth. Net weight is 2.761 kg. Installation must comply with DIN EN IEC 61439-2, which applies to insulated low-voltage switching device combinations in cabinet form.
Operational Advantages
The housing provides high mechanical and electrical safety through protection rating IP65 and impact resistance IK08. Tool-operated closures and double sealability ensure secure and controlled accessibility. The use of polycarbonate ensures high UV and weather resistance. The integrated meter mounting and flexible cable entry simplify installation and maintenance. Compliance with DIN EN IEC 61439-2 ensures adherence to applicable safety standards.