Further information for Gustav Hensel Mi 0401 Empty Enclosure 275x575x146 mm
General
Mounting dimensions
275 x 575 x 150 mm
Installation depth with mounting plate
146 mm
Installation depth with mounting rail
135 mm
Degree of protection
IP65
Impact strength
IK08
Rated insulation voltage
690 V a.c., 1000 V d.c., 1500 V d.c.
Protection class
II
Material
Polycarbonate
Filament test
960 °C
Ambient temperature
-25 to +70 °C
Maximum ambient temperature 24 h
35 °C
Cover lock
tool actuation
Cover colour
Grey
Colour of lower part
Grey
Compliance with standards
DIN EN IEC 61439-2
Power dissipation capability
1,9 W/K
UV resistant
Halogen free
Silicone-free
Combination possible
The empty enclosure Mi 0401 from Gustav Hensel is an ISO distribution enclosure designed for use in humid environments and protected installations. It serves as a base for mounting energy switching device combinations up to 630 A or as a single enclosure in low-voltage systems. The enclosure is made of high-quality polycarbonate, which is protection-insulated (protection class II) and therefore does not require additional earthing. The construction allows for mounting devices on mounting plates or DIN support rails. The installation dimensions are 275 mm width, 575 mm height, and 150 mm depth, with a maximum installation depth of 146 mm when using a mounting plate and 135 mm when using a support rail.
Applications include the installation of switching devices in industrial, commercial, or municipal facilities, particularly in environments with increased humidity. The enclosure is designed for wall mounting and can be secured using external brackets or mounting rails. Cable entry is possible on all enclosure walls via metric pre-punchings or add-on flanges, enabling flexible cabling. The wall penetrations with large openings facilitate electrical connections between multiple enclosures.
Functions and equipment in detail include an opaque lid in grey, which protects the internal components from external influences. The lid closures are equipped with tool operation, ensuring a secure and tool-assisted locking. The protection rating IP65 provides dust and splash water protection, allowing the enclosure to be used even in humid environments. The impact resistance IK08 offers protection against mechanical impacts. The rated insulation voltage is 690 V AC, 1000 V DC, and 1500 V DC, with the 1500 V value applying to the product in its delivered state with all-around mounted add-on flanges and without pre-punchings.
Technology explained simply shows that the enclosure is made of polycarbonate, which is UV-resistant, halogen-free, and silicone-free. The glow wire test according to IEC 60695-2-11 at 960 °C confirms its fire behaviour suitability. The ambient temperature can range between -25 °C and +70 °C, with the maximum ambient temperature over 24 hours being 35 °C. The enclosure is intended for use in protected installations, taking into account climatic influences on the operating equipment.
Compatibility and accessories include various add-on flanges such as the Mi FP 20 without pre-punchings, the Mi FP 70 for cable entry with diameter 30–72 mm, or the Mi FP 72 for two cables with 30–72 mm diameter. Other compatible components include mounting plates (e.g. Mi MP1, Mi MP2, Mi MP3), support rails (e.g. Mi TS 60), wall seals (Mi WD2), insert bushings (e.g. ESM 20, ESM 25), and step bushings (STM 20). The combinability with other Mi enclosures enables modular systems.
Mounting and installation are carried out on the wall, with fastening possible via external brackets (e.g. Mi AL40) or mounting rails (e.g. Mi MS2). The installation dimensions are designed to allow devices to be mounted on mounting plates or DIN support rails. The tool operation of the lid closures ensures a secure and controlled installation.
Operational advantages include high mechanical strength, weather-resistant surface, and secure insulation. The IP65 protection rating and IK08 impact resistance increase reliability in demanding environments. The modular construction allows for flexible expansion and adaptation to different requirements. The enclosure is compliant with DIN EN IEC 61439-2 and thus suitable for use in professional electrical installations.
Key terms in the text: empty enclosure, protection-insulated, IP65, IK08, polycarbonate, DIN EN IEC 61439-2.