Further information for Gustav Hensel Mi 0300 Distribution Enclosure Transparent Lid
General
Degree of protection
IP65
Impact strength
IK08
Protection class
II
Rated insulation voltage
1500 V DC
Material
Polycarbonate
Filament test
960 °C
Mounting dimensions width
275 mm
Mounting dimensions height
425 mm
Mounting dimensions depth
150 mm
Maximum mounting depth with mounting plate
146 mm
Max. mounting depth with mounting rail
135 mm
Power dissipation capability
1,5 W/K
Ambient temperature
-25 to +70 °C
Maximum ambient temperature 24h
35 °C
Cover lock
tool actuation
Cover colour
smoke topaz
Colour of lower part
Grey
Compliance with standards
DIN EN IEC 61439-2
UV resistant
Halogen free
Silicone-free
The empty enclosure Mi 0300 from Gustav Hensel is an ISO distribution enclosure for use in wet rooms and protected installations. It serves as a base for mounting power switching device combinations up to 630 A or as a single enclosure for smaller distribution tasks. The enclosure is made of high-quality polycarbonate, which is halogen-free and silicone-free, as well as UV-resistant, and meets the glow wire test according to IEC 60695-2-11 at 960 °C, ensuring high fire protection performance. The construction is double insulated (protection class II), so no additional earthing measures are required.
Applications include mounting switching devices, fuses, power switches, or other electrical components in industrial, commercial, or municipal installations. The enclosure is designed for wall mounting and can be secured using external lugs or mounting rails. The transparent lid cover made of smoke topaz allows visual inspection of installed components without opening the lid. The lid closures are designed for tool operation, ensuring secure and tool-assisted installation.
Functions and equipment in detail include IP65 protection rating, which is dust-tight and protected against water jets from any angle, as well as impact resistance of IK08, protecting the enclosure against mechanical impacts. Cable entry is provided on all enclosure walls via metric pre-punchings or add-on flanges, enabling flexible and secure cabling. The wall penetrations with large openings facilitate electrical connections between multiple enclosures.
Technology explained simply shows that the enclosure has a rated insulation voltage of 1500 V DC when operated in the delivered state with all-around mounted add-on flanges (e.g. Mi FP 15 or Mi FP 20) without pre-punchings. Additional proof is required for additional cable entry systems. The installation dimensions are W 275 mm x H 425 mm x D 150 mm, with a maximum installation depth of 146 mm with mounting plate and 135 mm with support rail. The overall dimensions of the enclosure are H 450 mm x W 300 mm x D 170 mm. The net weight is 2.628 kg.
Compatibility and accessories include various add-on components such as mounting plates (e.g. Mi MP3), add-on flanges (e.g. Mi FM 60, Mi FM 32), cable glands (e.g. ESM 20, ESM 25), support rails (e.g. Mi TS 30), and wall seals (e.g. Mi WD2). These allow individual adaptation to specific mounting and cabling situations. The power loss dissipation is 1.5 W per Kelvin temperature difference, describing the thermal load capacity of the enclosure.
Mounting and installation is done on a wall, with flexible fastening options via external lugs or mounting rails. The installation dimensions are designed to allow devices to be mounted on mounting plates or DIN support rails. The tool-operated closures on the lid ensure secure and durable sealing.
Operational advantages include high mechanical and electrical safety, easy installation, and visual inspection of devices. The enclosure is intended for use in protected installations, with ambient temperatures ranging from -25 °C to +70 °C. The maximum ambient temperature over 24 hours is 35 °C. Compliance with standards is according to DIN EN IEC 61439-2, confirming quality and safety for low-voltage switching device combinations in box construction.
Key terms in the text: empty enclosure, double insulated, IP65, polycarbonate, protection class II, rated insulation voltage.