Clamp milliammeter for measuring leakage currents and process signal currents (4-20 mA). The clamp milliammeter is ideally suited to measuring small direct and alternating currents from 1 mA. Equipped with a power-saving circuit, data interface, signaling of measuring range overruns and flexible current sensor, it can also be used under very unfavorable mechanical conditions.Measuring ranges: - DC 100 mA / 1000 mA, - AC 100 mA / 1000 mA / 10 Awith digital displaySwitching between DC and AC measurementsZero point adjustment for DC measurementsSave measured value (DATA - HOLD)Power-saving circuitCurrent clamp with 1.2 m cable lengthClamp opening 30 mm ØAnalog output (0 ... 100 mV) for connecting recording devices, e.g. memory multimeters. 1 measuring device1 current clamp4 LR6 batteries1 carrying case1 operating manual1 data recording cable set, consisting of 2 cables of 1.8 m each with 1 touch-protected plug and 1 crocodile clip