Goobay 95519, EAN: 4040849955198

Goobay 95519 Cat6 Patch Cable 5m S/FTP transparent

Cables > Data lines > Cat6 Patch Cable

Goobay 95519 Cat6 Patch Cable 5m S/FTP transparent

Lieske Part No. 425941
Mfg Part No 95519
EAN-Code 4040849955198
Manufacturer Goobay
Here only 1,50 EUR
1,78 EUR incl. VAT

Further information for Goobay 95519 Cat6 Patch Cable 5m S/FTP transparent

General
Cable typeTubular cable
SpecificationCAT 6
Shielding classS/FTP (PiMF)
Connection, typeRJ45 connector (8P8C)
Connection 2, typeRJ45 connector (8P8C)
Cable length5 m
Conductor, materialCCA (copper-clad aluminium)
AWG27
Number of shields2
Type 1, shieldingFilm (Alu) PiMF
Type 2, shieldingBraided (Alu)
Bend protectionAmbidextrous
Pair sequenceEIA/TIA 568B
ColourTransparent
Contact gold plating3 µm
Length specificationon Slimline strain relief sleeve
Pin retention protectionYes
The Goobay CAT 6 patch cable is a double-shielded network cable for connecting network components in a local area network (LAN). It features two RJ45 connectors (8P8C) at both ends and is designed for a cable length of 5 metres. Shielding is performed according to the S/FTP (PiMF) standard, where each individual wire pair is shielded with a metallic foil (PIMF – Pairs in Metal Foil), and additionally, a complete braided shield made of aluminium encloses the entire cable. This double shielding ensures high resistance to interference and minimizes electromagnetic influence, which is particularly advantageous in environments with high electromagnetic noise.

Applications
This cable is designed for use in Ethernet networks supporting data transfer rates of up to 1 Gbit/s at a bandwidth of 250 MHz. It is suitable for use in offices, server rooms, or other environments where a stable and reliable network connection is required. The transparent outer jacket allows visual inspection of the cable condition and facilitates identification in cable management.

Functions and Features in Detail
The contact surfaces of the RJ45 connectors are coated with a 3-µm gold plating, ensuring a reliable and corrosion-resistant electrical connection. The connectors are equipped with a latch nose protection, which reduces mechanical stress during connection and increases the connector's lifespan. The wire pair sequence follows the EIA/TIA 568B standard, ensuring compatibility with standard network devices. The slimline strain relief boots at both ends protect the cable from bending stress and contribute to its durability. The cable length is directly marked on the boot, facilitating identification during use.

Technology Explained Simply
The shielding class S/FTP (PiMF) means that both the individual wire pairs and the entire cable are shielded. Each wire pair is individually wrapped in a metallic foil (PIMF), reducing crosstalk between pairs. The additional braided shield protects the entire cable from external electromagnetic interference. The cable consists of a round cable with inner conductors made of CCA (copper-clad aluminium), which represents a cost-effective alternative to pure copper, although with lower conductivity. The AWG size is 27, indicating a relatively thin conductor cross-section, which is sufficient for the intended application.

Compatibility and Accessories
The cable is compatible with all devices supporting an RJ45 connector (8P8C), such as switches, routers, network interface cards (NICs), or network print servers. It complies with the CAT 6 specification and is therefore suitable for Gigabit Ethernet applications. Use in combination with other CAT 6 or higher-rated cables is possible, with the overall network performance determined by the weakest component.

Installation and Mounting
Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The strain relief boots at both ends facilitate handling and protect the cable when securing it to wall mounts or patch panels. The transparent jacket allows for quick visual inspection for damage or wear.

Operational Advantages
The double shielding ensures high resistance to interference and minimizes data loss due to electromagnetic interference. The gold-plated contacts ensure a long-lasting and reliable connection. The slimline strain relief boot protects the cable from mechanical stress, increasing its lifespan. The transparent colouring facilitates identification and maintenance in cable management.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/425941
qrcode für Goobay 95519 Cat6 Patch Cable 5m S/FTP transparent