Goobay 95499, EAN: 4040849954993

Goobay 95499 Cat6 Patch Cable 2m S/FTP transparent

Cables > Data lines > Cat6 Patch Cable

Goobay 95499 Cat6 Patch Cable 2m S/FTP transparent

Lieske Part No. 437082
Mfg Part No 95499
EAN-Code 4040849954993
Manufacturer Goobay
Here only 0,88 EUR
1,05 EUR incl. VAT

Further information for Goobay 95499 Cat6 Patch Cable 2m S/FTP transparent

General
Cable typeTubular cable
SpecificationCAT 6
Shielding classS/FTP (PiMF)
Number of shields2
Type 1, shieldingFilm (Alu) PiMF
Type 2, shieldingBraided (Alu)
Connection, typeRJ45 connector (8P8C)
Connection 2, typeRJ45 connector (8P8C)
Cable length2 m
Conductor, materialCCA (copper-clad aluminium)
AWG27
ColourTransparent
Pair sequenceEIA/TIA 568B
Bend protectionAmbidextrous
Contact gold plating3 µm
Length specificationon pointed slimline strain relief sleeve
Pin retention protectionYes
The Goobay CAT 6 patch cable is a double-shielded network cable for use in local area networks (LAN). It features two RJ45 connectors (8P8C) at both ends and is designed with a cable length of 2 metres. The cable is transparent and used to connect network components such as switches, routers, PCs, or network printers. Shielding is performed according to the S/FTP (PiMF) standard, where each pair of conductors is individually wrapped in a metallic foil (PiMF), and additionally, an overall shield made of aluminium braid surrounds the entire cable core. This double shielding ensures high immunity against electromagnetic interference and prevents crosstalk, stabilising signal quality and data transfer rate.

Applications
This cable is suitable for use in office and home environments, as well as in environments with moderate electromagnetic interference levels. Due to its shielding and the use of CCA (copper-clad aluminium) as the inner conductor material, it is designed for standard network applications requiring a maximum bandwidth of 550 MHz and data rates up to 10 Gbit/s over short distances. The transparent outer jacket allows visual inspection of the cable condition and facilitates identification in cable management.

Functions and Features in Detail
The RJ45 connectors are equipped with gold-plated contact surfaces (3 µm), ensuring a reliable and corrosion-resistant connection. The connectors feature a latch nose protection, which enhances mechanical stability and protects the cable from damage when inserting into sockets. The strain relief boots are tapered and marked with length indication, aiding orientation and identification of the cable during use. The pair sequence follows the EIA/TIA 568B standard, ensuring compatibility with standard network devices.

Technology Explained Simply
The shielding class S/FTP (PiMF) means that each pair of conductors is individually shielded with a metallic foil (PiMF), and additionally, an overall shield made of aluminium braid surrounds the entire cable core. This construction reduces electromagnetic interference (EMI) and crosstalk, which is particularly important at higher data transfer rates. The inner conductor material consists of CCA (copper-clad aluminium), which serves as a cost-effective alternative to pure copper but has lower conductivity. The AWG size is 27, indicating a relatively thin conductor cross-section, which is sufficient for short connections indoors.

The transparent outer jacket is designed for indoor use and does not offer special weather resistance. The cable is not intended for outdoor use or in damp environments, as no specific protection rating (e.g. IP67) is specified.

Compatibility and Accessories
The cable is compatible with all devices that support an RJ45 socket (8P8C) and meet the CAT 6 specification. It can be used in networks transmitting up to 10 Gbit/s over short distances. Use in combination with other CAT 6 or CAT 6A cables is possible, although the maximum bandwidth is limited by the weakest cable in the path.

Installation and Mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets of the network components. The strain relief boots protect the connectors from mechanical stress, especially during frequent insertion and removal. The transparent jacket facilitates visual inspection of the cabling, particularly for identifying cables in complex installations. No special tools are required, as the connectors are inserted directly into the sockets.

Operational Advantages
The double shielding (S/FTP) ensures high signal integrity and minimises interference, which is particularly beneficial in environments with electrical devices or other sources of electromagnetic interference. The gold-plated contacts ensure a long-lasting and reliable connection. The transparent jacket supports cable management, as the cable is easily identifiable. The cable length of 2 metres is sufficient for typical applications in offices or home environments, avoiding unnecessary cable deployment.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/437082
qrcode für Goobay 95499 Cat6 Patch Cable 2m S/FTP transparent