Further information for Goobay 94910 Cat6 S/FTP Patch Cable White
Technical data
Bend protection
Ambidextrous
Pin retention protection
Ambidextrous
Cable jacket, material
LSZH
Conductor, material
CU (Copper)
Connection, type
RJ45 connector (8P8C)
Connection 2, type
RJ45 connector (8P8C)
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Connection, contact material
Gold-plated 3μm
Cable type
Tubular cable
Colour
White
Colour version
White
Special feature
Length indication on connector
Connection, shielding
LSZH-compliant
The Goobay Patch cable Cat6A is a double shielded network cable for connecting network devices such as PCs, laptops, routers, switches, Smart-TVs, game consoles and NAS systems. It is suitable for home networks, home office environments as well as professional applications where stable and fast data transmission is required. The cable is designed as a round cable and features two RJ45 connectors (8P8C) at both ends, which are shielded to minimize electromagnetic interference.
Applications
This cable is designed for use in local area networks (LAN) and supports data transmission rates up to 10 Gbit/s (10/100/1000/10000 Mbit/s) in the 10-Gigabit-Ethernet standard. It is suitable for use with protocols such as 10BASE-T, 100BASE-TX and 1000BASE-T. The cable construction complies with the ISO/IEC 11801 Cat 6A Class Ea Channel Link standard, ensuring a maximum bandwidth of 500 MHz. It is also suitable for use with Power over Ethernet (PoE and PoE+), enabling simultaneous power and data transmission over the network cable.
Functions and Features in Detail
The cable features an S/FTP overall shielding, consisting of an aluminium foil shielding (PiMF) for individual wire pairs and an aluminium braid shielding (overall shielding) around the entire cable jacket. This double shielding reduces electromagnetic interference and ensures high signal integrity. The inner conductors are made of pure copper (CU) with an AWG stranding of 27/7, ensuring good conductivity and mechanical stability. The contact surfaces of the RJ45 connectors are gold-plated with 3 µm to prevent corrosion and ensure a reliable electrical connection.
Technology Explained Simply
The shielding class S/FTP (PiMF) means that each wire pair is individually shielded with aluminium foil (PiMF = Pair in Foil) and additionally the entire cable jacket is surrounded by an aluminium braid. This construction protects the cable from external interference and prevents the emission of electromagnetic waves. The cable jacket is made of halogen-free material (LSZH), which does not release toxic gases in case of fire and is therefore suitable for indoor use. The cable length is 50 m, with the length indication directly printed on the connectors.
Compatibility and Accessories
The cable is suitable for all devices that have RJ45 connectors (8P8C) and support the mentioned network standards. It is compatible with PoE technology (PoE, PoE+), allowing it to be used for powering IP cameras, access points or telephones via the network cable. The wiring follows the EIA/TIA-568B standard, ensuring standardized cabling.
Installation and Mounting
The cable is equipped with strain relief boots at both ends, protecting the cable from bending and kinking stresses and ensuring a longer service life. The stable jacket and latch protection on the RJ45 connectors prevent the latch from catching or breaking, enabling a secure and durable connection. The minimum bending radius is 59 mm, which should be considered during installation to avoid damage. The operating temperature range is between -20 °C and +65 °C.
Operational Advantages
The combination of double shielding, gold-plated contacts and copper conductors ensures high signal quality and minimal data loss. The halogen-free jacket (LSZH) increases safety during use, especially in enclosed spaces. The length indication on the connectors simplifies identification and management of the cable in the network. The cable is CAT-6A tested and includes a test report, confirming compliance with standards. The use of PoE enables simplified installation, as no additional power supplies are required for connected devices.