Further information for Goobay 93954 Network Cable CAT 6 S/FTP gray
Technical data
Cable type
Tubular cable
Cable jacket, material
LSZH
Conductor, material
CCA (copper-clad aluminium)
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Fire class (BauPVO/CPR)
Eca
Colour version
Grey
Colour
Grey
Consumption unit
1 piece coil
Packaging type
Cable spool-drum
Specification
CAT 6
Inner conductor Ø of insulated core
1.05 mm (+/-0.05)
AWG
26/7 (stranded)
Meter scaling
LSZH-compliant
The Goobay CAT 6 network cable is an unterminated, double-shielded LAN cable designed for indoor installation in home networks, home office environments, and small office/home office applications (SOHO). It is used to connect end devices such as PCs, laptops, routers, switches, smart TVs, gaming consoles, and NAS systems, enabling reliable data transmission. The cable is designed as a round cable and features a meter scale to support precise length measurement during installation.
Applications
This cable is intended for indoor use and is particularly suitable for installation in offices, living spaces, and small network infrastructures. It is designed for termination with network connectors (RJ45) and is typically processed on-site by installers or network technicians. The maximum transmission length is 20 meters, which is sufficient for typical SOHO applications. Use in outdoor environments is not intended, as the cable is not designed for weather-resistant conditions.
Functions and Features in Detail
The cable features double shielding: individual wire pairs are shielded with aluminum foil (PiMF), while the entire cable jacket is protected by an aluminum braid shield (S/FTP). This construction minimizes electromagnetic interference and ensures stable data transmission. The inner conductor consists of copper-clad aluminum (CCA) with a diameter of 1.05 mm (±0.05 mm) and an AWG structure of 26/7 (stranded), providing sufficient conductivity for CAT 6 requirements. The cable color is gray, enabling discreet integration into office environments.
Technology Explained Simply
The S/FTP (Screened/Foiled Twisted Pair) shielding technology combines a foil shield per wire pair with an overall aluminum braid shield. This protects data transmission from external electromagnetic interference and prevents signal radiation from the cable. The halogen-free cable jacket (LSZH) reduces the formation of toxic gases and smoke in case of fire, increasing building safety. The cable length is 100 meters, with the meter scale enabling precise length measurement. The operating temperature ranges from -10 °C to +70 °C, which is sufficient for indoor applications.
Compatibility and Accessories
The cable complies with ISO/IEC 11801, Class E, Channel 20 m, and is therefore suitable for CAT 6 applications. Termination is performed by attaching RJ45 connectors to both ends of the cable, with wiring according to T568A or T568B standards. The color coding of the wire pairs (blue, orange, green, brown) follows international standards and facilitates correct wiring.
Installation and Mounting
The cable is designed as an unterminated installation cable and must be fitted with RJ45 connectors on-site. Installation is typically carried out by professionals who route the cable in wall cavities, ceilings, or floor ducts. The meter scale simplifies length measurement during installation. Processing requires tools such as a cable cutter, crimping tool, and cable tester to verify the connection.
Operational Advantages
The double shielding ensures high resistance to interference and minimizes data loss due to electromagnetic interference. The halogen-free jacket increases fire safety in buildings. The use of CCA conductors offers a cost-effective alternative to pure copper, with performance sufficient for CAT 6 applications. The 100-meter cable length allows flexible planning, while the maximum transmission length of 20 meters must be considered during installation. The gray color ensures discreet integration into indoor spaces.
Standards and Approvals
The cable meets the requirements of the German Building Products Regulation (BauPVO) and the Construction Products Regulation (CPR), and carries the fire protection class Eca. It complies with standards ISO/IEC 11801, EN 50173-1, and ANSI/TIA-568-C.2. The marking includes the inscription “CAT.6 S/FTP PATCH CORD CABLE 250 MHz 4PAIRS ISO/IEC 11801”, with marking occurring every 1 meter. The use of CCA conductors is not explicitly required by the standard, but is accepted for CAT 6 applications in SOHO environments.