Goobay 93782, EAN: 4040849937828

Goobay 93782 Cat6 S/FTP Patch Cable Grey

Cables > Data lines > Cat6 Patch Cable

Goobay 93782 Cat6 S/FTP Patch Cable Grey

Lieske Part No. 338839
Mfg Part No 93782
EAN-Code 4040849937828
Manufacturer Goobay
Here only 2,49 EUR
2,96 EUR incl. VAT

Further information for Goobay 93782 Cat6 S/FTP Patch Cable Grey

Technical data
Connection, contact materialGold-plated 3μm
Connection, typeRJ45 connector (8P8C)
Pin retention protectionAmbidextrous
Connection 2, typeRJ45 connector (8P8C)
Cable typeTubular cable
Conductor, materialCU (Copper)
Cable jacket, materialLSZH
Type 1, shieldingFilm (Alu) PiMF
Type 2, shieldingBraided (Alu) overall shield
Bend protectionAmbidextrous
ColourGrey
Special featureLength indication on connector
Consumption unit1 piece in plastic bag
Connection, shieldingYes
LSZH-compliantYes
The Goobay Patch cable Cat6A is a double-shielded network cable for connecting network devices such as PCs, laptops, routers, switches, Smart-TVs, game consoles and NAS systems. It is designed for use in home networks, home office environments as well as in professional IT infrastructures. The cable features two RJ45 connectors (8P8C) and is designed for data transfer rates up to 10 Gbit/s (10/100/1000/10000 Mbit/s), making it suitable for modern network applications. The cable construction complies with the ISO/IEC 11801 Cat 6A Class Ea Channel Link standard, ensuring a maximum bandwidth of 500 MHz.

Applications
This cable is suitable for use in structured cabling systems where high data rates and low interference are required. It is intended for indoor use, with an operating temperature range between -20 °C and +65 °C. The cable is suitable for Power over Ethernet (PoE and PoE+), enabling power supply to end devices via the network cable.

Functions and Equipment in Detail
The cable is equipped with S/FTP shielding, consisting of an aluminium foil shield for individual wire pairs (PiMF) and an aluminium braid shield for the entire cable jacket. This double shielding reduces electromagnetic interference and ensures clear signal transmission. The contact surfaces of the RJ45 connectors are gold-plated with 3 μm, preventing corrosion and ensuring a stable electrical connection. The inner conductors are made of pure copper (CU) with an AWG stranding of 27/7, providing good conductivity and mechanical stability.

Technology Explained Simply
The designation S/FTP (Screened/Foiled Twisted Pair) describes the shielding type: each wire pair is wrapped in aluminium foil (PiMF), and the entire cable jacket is additionally shielded with an aluminium braid. This construction protects the cable from external electromagnetic interference and simultaneously prevents signal radiation. The length marking on the connector facilitates identification and management of the cable in the network. The strain relief boots at both ends protect the connectors from mechanical stress and prevent premature breakage of the cable.

Compatibility and Accessories
The cable is suitable for all devices that support RJ45 connectors (8P8C) and operate with Cat 6A-compliant networks. It is designed for use with PoE-capable devices, enabling power supply to end devices such as IP cameras or access points via the network cable. The wiring follows EIA/TIA-568B, which represents a standard wiring configuration for network cables. The cable jacket materials are halogen-free (LSZH), producing lower smoke and toxicity levels in case of fire.

Installation and Mounting
The cable can be installed in existing networks without special tools. The RJ45 connectors feature latch protection to prevent snagging or breaking of the latch. The stable jacket and strain relief boots facilitate installation, especially in frequently bent conditions or in tight cabling spaces. The minimum bending radius is 59 mm, which should be considered during installation.

Operational Advantages
The double shielding and gold-plated contacts ensure reliable and interference-free data transmission. The use of pure copper as conductor material ensures high conductivity. The halogen-free jacket (LSZH) increases safety in case of fire. The cable is CAT-6A tested and delivered with a test report, confirming compliance with standards. The length is 3 m, which is sufficient for many applications in offices, apartments and small server rooms.

Colour and Marking
The cable is grey in colour, allowing it to blend unobtrusively into typical IT environments. The length marking on the connector facilitates identification and management in the network. The cable jacket is printed with the text “CAT.6A S/FTP PIMF LSZH HALOGENFREE 500 MHz ISO/IEC 11801 & ANSI/TIA-568-C.2”, making the technical specifications visually identifiable.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/338839
qrcode für Goobay 93782 Cat6 S/FTP Patch Cable Grey