Goobay 93741, EAN: 4040849937415

Goobay 93741 Cat6 S/FTP Patch Cable Gray

Cables > Data lines > Cat6 Patch Cable

Goobay 93741 Cat6 S/FTP Patch Cable Gray

Lieske Part No. 347725
Mfg Part No 93741
EAN-Code 4040849937415
Manufacturer Goobay
Here only 1,95 EUR
2,32 EUR incl. VAT

Further information for Goobay 93741 Cat6 S/FTP Patch Cable Gray

Technical data
Connection, contact materialGold-plated 3μm
Connection, typeRJ45 connector (8P8C)
Pin retention protectionAmbidextrous
Connection 2, typeRJ45 connector (8P8C)
Cable typeTubular cable
Conductor, materialCU (Copper)
Cable jacket, materialLSZH
Type 1, shieldingFilm (Alu) PiMF
Type 2, shieldingBraided (Alu) overall shield
Bend protectionAmbidextrous
ColourGrey
Special featureLength indication on connector
Consumption unit1 piece in plastic bag
Connection, shieldingYes
LSZH-compliantYes
The Goobay Cat6A patch cable is a double-shielded network cable for connecting IT components such as PCs, laptops, routers, switches, smart TVs, gaming consoles, and NAS systems. It is suitable for home networks, home office environments, as well as professional applications where stable and fast data transmission is required. The cable is designed as a round cable and features two RJ45 connectors (8P8C) at both ends, equipped with shielding to minimize electromagnetic interference. The contact surfaces are gold-plated with 3 μm, preventing corrosion and ensuring clear signal transmission. The inner conductors are made of pure copper (CU), providing high conductivity and low signal loss.

Applications
This cable is designed for use in networks with high requirements for bandwidth and signal integrity. It supports 10-Gigabit Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s) and is therefore suitable for modern network infrastructures requiring high data rates. The maximum bandwidth is 500 MHz, enabling reliable transmission even over longer distances. Compliance with the ISO/IEC 11801 Cat 6A Class Ea Channel Link standard ensures adherence to international standards for network cables. The cable is also suitable for Power over Ethernet (PoE and PoE+), enabling power supply via the network cable, for example for IP cameras or access points.

Functions and Features in Detail
The shielding consists of two layers: an aluminum foil shield (PiMF) protects individual wire pairs, while an aluminum braid (overall shield) surrounds the entire cable jacket. This S/FTP shielding (Shielded/Foiled Twisted Pair) reduces electromagnetic interference and crosstalk, which is particularly important in environments with high electromagnetic noise. The strain relief boots at both ends protect the cable from mechanical stress and prevent premature breakage. The cable jacket is made of halogen-free material (LSZH), which produces less smoke and toxic gases in case of fire. The cable color is gray, allowing it to blend inconspicuously into many installations.

Technical Explanation
The use of gold-plated contacts (3 μm) ensures a durable and corrosion-free connection that remains stable even after frequent plugging and unplugging. The copper conductors (CU) with an AWG cross-section of 27/7 (stranded) offer good electrical conductivity and are flexible enough for installations in confined spaces. The latch protection feature on the RJ45 connectors prevents the latch from catching or breaking, enhancing the mechanical stability of the connection. The cable length is printed directly on the connectors, which is helpful during installation and maintenance. The wiring follows the EIA/TIA-568B standard, ensuring standardized and compatible cabling.

Compatibility and Accessories
The cable is compatible with all devices using RJ45 connectors (8P8C) and supporting Cat6A or higher categories. It can be used in existing networks to enhance performance or improve stability. It can be used in combination with other Cat6A cables or components, with the overall shielding and gold-plated contacts maintaining signal quality. The cable is intended for indoor use, with an operating temperature range between -20 °C and +65 °C.

Installation and Mounting
Installation is done by simply plugging the RJ45 connectors into the corresponding sockets of network devices. The strain relief boots and stable jacketing facilitate cable routing, especially in tight or moving areas. The bending radius is more than 59 mm, which should be considered when routing in cable ducts or along walls. The cable length is 2 m, sufficient for typical applications in offices, apartments, or server rooms.

Operational Advantages
The cable offers high signal stability and low error susceptibility, resulting in a reliable network connection. The double shielding ensures low interference, especially in environments with many electrical devices. PoE support enables power delivery via the network cable, reducing the number of required power cables. The halogen-free jacket (LSZH) increases safety in case of fire, as it emits less smoke and toxic gases. The length marking on the connector simplifies identification and maintenance of the cable in the network.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/347725
qrcode für Goobay 93741 Cat6 S/FTP Patch Cable Gray