Further information for Goobay 93709 Cat6 S/FTP Patch Cable white
Technical data
Connection, type
RJ45 connector (8P8C)
Connection 2, type
RJ45 connector (8P8C)
Bend protection
Ambidextrous
Pin retention protection
Ambidextrous
Connection, contact material
Gold-plated 3μm
Cable type
Tubular cable
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Conductor, material
CU (Copper)
Cable jacket, material
LSZH
Colour
White
Colour version
White
Special feature
Length indication on connector
Connection, shielding
LSZH-compliant
The Goobay Patch cable Cat6A is a double shielded network cable for connecting IT and network devices. It connects devices such as PCs, laptops, routers, switches, Smart-TVs, gaming consoles and NAS systems in home networks, home office environments as well as in professional work environments. The cable is designed for use in networks with high requirements for signal integrity and electromagnetic interference protection and supports data transfer rates up to 10 Gbit/s over 10-Gigabit-Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s). The cable construction complies with the ISO/IEC 11801 Cat 6A Class Ea Channel Link standard and is designed for a maximum bandwidth of 500 MHz.
Double shielded construction
The cable features an S/FTP overall shielding, consisting of an aluminium foil shielding for the individual wire pairs (PiMF) and an aluminium braid shielding for the entire cable jacket. This shielding reduces electromagnetic interference and ensures stable, interference-free data transmission, especially in environments with high electromagnetic noise. The shielding is integrated at both connectors, maintaining signal quality over the entire cable length.
Connector and contact quality
Both ends of the cable are fitted with RJ45 connectors (8P8C) with a gold-plated contact surface of 3 μm. This plating prevents corrosion and ensures a reliable electrical connection, which is particularly important when frequently plugging and unplugging. The wiring follows EIA/TIA-568B, ensuring a standardised and compatible connection. The connectors are equipped with latch protection to prevent the latch from catching or breaking and to ensure a stable connection.
Cable construction and protection measures
The cable is designed as a round cable and features a halogen-free cable jacket made of LSZH material, which does not release toxic gases in case of fire. The inner conductors are made of pure copper (CU) with an AWG stranding of 27/7, enabling high conductivity and low signal loss. Integrated strain relief boots on both ends protect the cable from mechanical stress and prevent the conductors from becoming brittle. The robust jacket provides additional mechanical protection.
Compatibility and applications
The cable is suitable for Power over Ethernet (PoE and PoE+), allowing it to also supply power to end devices such as IP cameras, access points or telephones via the network cable. The cable length is printed directly on the connectors, facilitating identification of the cable length during use. The cable length is 10 m.
Operating environment
The cable is designed for an operating temperature range of -20 °C to +65 °C and can therefore be used in a wide range of indoor and outdoor environments. The minimum bending radius is 59 mm, enabling flexible handling and installation. The use of PVC as the housing material for the connectors ensures a robust and long-lasting construction.
Operational advantages
The combination of double shielding, gold-plated contacts, pure copper conductors and mechanical protection measures ensures high reliability and long service life. The cable is suitable for both professional and private applications and provides clear signal quality without interference. The CAT-6A certification including test report confirms compliance with the required standards.