Goobay 93701, EAN: 4040849937019

Goobay 93701 Cat6 S/FTP Patch Cable Gray

Cables > Data lines > Cat6 Patch Cable

Goobay 93701 Cat6 S/FTP Patch Cable Gray

Lieske Part No. 349918
Mfg Part No 93701
EAN-Code 4040849937019
Manufacturer Goobay
Here only 6,51 EUR
7,75 EUR incl. VAT

Further information for Goobay 93701 Cat6 S/FTP Patch Cable Gray

Technical data
Connection, typeRJ45 connector (8P8C)
Connection 2, typeRJ45 connector (8P8C)
Bend protectionAmbidextrous
Pin retention protectionAmbidextrous
Connection, contact materialGold-plated 3μm
Cable typeTubular cable
Type 1, shieldingFilm (Alu) PiMF
Type 2, shieldingBraided (Alu) overall shield
Conductor, materialCU (Copper)
Cable jacket, materialLSZH
ColourGrey
Colour versionGrey
Special featureLength indication on connector
Connection, shieldingYes
LSZH-compliantYes
The Goobay Patch Cable Cat6A is a double-shielded network cable for connecting IT components such as PCs, laptops, routers, switches, Smart TVs, gaming consoles, and NAS systems. It serves as a reliable connection solution in home networks, home office environments, as well as in professional network infrastructures. The cable is designed for use in environments with high requirements for signal integrity and electromagnetic interference protection.

Applications

The cable is designed for data transmission in networks up to 10 Gbit/s and supports the standards 10BASE-T, 100BASE-TX, 1000BASE-T, as well as 10/100/1000/10000 Mbit/s. It is therefore suitable for modern networks requiring high bandwidth and low latency. Compatibility with Power over Ethernet (PoE and PoE+) enables power supply to end devices via the network cable, simplifying the installation of IP cameras, access points, or phones without additional power sources.

Functions and Features in Detail

The cable features two RJ45 connectors (8P8C) at both ends, equipped with shielding. The contact surfaces are gold-plated with 3 μm thickness, preventing corrosion and ensuring a stable, long-lasting connection. The inner conductors are made of pure copper (CU), ensuring high conductivity and minimal signal loss. Integrated strain relief boots on both ends protect the cable from mechanical stress and prevent the conductors from breaking. The latch protection on the connectors prevents the latch from catching or breaking, enhancing mechanical stability and connection reliability.

Technology Explained Simply

Shielding is provided in two layers: an aluminum foil shield (PiMF) protects individual wire pairs, while an aluminum braid (overall shield) surrounds the entire cable jacket. This S/FTP shielding (Shielded/Foiled Twisted Pair) reduces electromagnetic interference and crosstalk, which is particularly important in environments with high electromagnetic noise. The cable jacket is made of halogen-free material (LSZH), which does not release toxic gases in case of fire, making it suitable for indoor safety. The maximum bandwidth is 500 MHz, meeting the high demands of modern networks. The wiring follows EIA/TIA-568B, ensuring standardized and compatible cabling.

Compatibility and Accessories

The cable is CAT-6A tested and complies with the ISO/IEC 11801 CAT 6A Class Ea Channel Link standard. The cable length is printed directly on the connectors, facilitating identification and maintenance in the network. It is designed for indoor use and can operate at temperatures from -20 °C to +65 °C. The minimum bending radius is 59 mm, enabling flexible handling.

Installation and Mounting

Installation is done by simply plugging the RJ45 connectors into the corresponding sockets of network devices. The strain relief boots and sturdy cable jacket facilitate installation and protect the cable from mechanical damage. The double shielding ensures reliable performance even in environments with high electromagnetic noise.

Advantages in Operation

The combination of double shielding, gold-plated contacts, and pure copper conductors ensures high signal quality and minimal interference. PoE support enables simplified installation of network devices. The halogen-free jacket increases safety during use. The length marking on the connectors simplifies identification and maintenance in the network. The cable is suitable for both professional and private network applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/349918
qrcode für Goobay 93701 Cat6 S/FTP Patch Cable Gray