Further information for Goobay 93679 Cat6A Patch Cable S/FTP yellow
Technical data
Connection, contact material
Gold-plated 3μm
Connection, type
RJ45 connector (8P8C)
Connection 2, type
RJ45 connector (8P8C)
Pin retention protection
Ambidextrous
Bend protection
Ambidextrous
Cable type
Tubular cable
Conductor, material
CU (Copper)
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Cable jacket, material
LSZH
Colour
Yellow
Special feature
Length indication on connector
Consumption unit
1 piece in plastic bag
Connection, shielding
LSZH-compliant
The Goobay Patch cable Cat6A is a double-shielded network cable for connecting IT and network devices. It connects devices such as PCs, laptops, routers, switches, Smart-TVs, game consoles, and NAS systems in home networks, home office environments, as well as in professional work environments. The cable is designed for use in networks with high requirements for bandwidth and signal quality and complies with Category Cat6A.
Applications
The cable is suitable for use in local area networks (LAN) that support 10-Gigabit-Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s). It is suitable for applications requiring high data transfer rates and low interference. The cable can also be used in environments with electromagnetic interference sources, as it is double-shielded. The maximum bandwidth is 500 MHz, enabling stable transmission even at high frequencies.
Functions and equipment in detail
The cable features two RJ45 connectors (8P8C) at both ends, with a gold-plated contact surface of 3 μm. This gold plating prevents corrosion and ensures a reliable electrical connection. The inner conductors are made of pure copper (CU) and are stranded (AWG 27/7), ensuring good conductivity and flexibility. The termination follows EIA/TIA-568B.
Technology explained simply
Shielding is provided in two layers: individual wire pairs are wrapped in an aluminium foil shield (PiMF), and the entire cable is covered with an aluminium braid shield (S/FTP). This double shielding reduces electromagnetic interference (EMV) and prevents crosstalk between wire pairs. The cable jacket is made of halogen-free material (LSZH), which does not release toxic gases in case of fire. The cable length is 1 m, and the length is directly marked on the connectors.
Compatibility and accessories
The cable is suitable for Power over Ethernet (PoE and PoE+), enabling power supply via the network cable. It is CAT-6A-tested and complies with the test standard ISO/IEC 11801 Cat6A Class Ea Channel Link. The connection is made via standardised RJ45 connectors, which feature strain relief and a latch protection to minimise mechanical stress.
Installation and mounting
Installation is done by simply plugging the RJ45 connectors into the corresponding sockets on the devices. The strain relief boots and the robust cable jacket protect the cable from mechanical stress, especially when frequently bent or installed in confined spaces. The minimum bending radius is 59 mm. The operating temperature range is between -20 °C and +65 °C.
Advantages in operation
The double shielding ensures high signal integrity and minimises interference. The gold-plated contacts ensure a long-lasting and reliable connection. The use of pure copper as conductor material ensures low signal loss. The halogen-free cable material is safer in case of fire. The length marking on the connectors simplifies identification and maintenance of the cable in the network.
The cable is delivered in a plastic bag packaging. The packaging contains a single cable piece.