Further information for Goobay 93660 Cat6 S/FTP Patch Cable Green
Technical data
Connection, type
RJ45 connector (8P8C)
Connection 2, type
RJ45 connector (8P8C)
Bend protection
Ambidextrous
Pin retention protection
Ambidextrous
Connection, contact material
Gold-plated 3μm
Cable type
Tubular cable
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Conductor, material
CU (Copper)
Cable jacket, material
LSZH
Colour version
Green
Colour
Green
Special feature
Length indication on connector
Connection, shielding
LSZH-compliant
The Goobay Patch Cable Cat6A is a double-shielded network cable for connecting IT and network devices. It connects PCs, laptops, routers, switches, smart TVs, gaming consoles, NAS systems and similar end devices in home networks, home office environments as well as in professional network infrastructures. The cable is designed as a round cable and features two RJ45 connectors (8P8C) at both ends, which are equipped with shielding. The contact surfaces of the connectors are gold-plated with 3 μm, preventing corrosion and ensuring a stable, interference-free signal transmission. The inner conductors are made of pure copper (CU) and are structured as twisted pairs (AWG 27/7) to ensure high data integrity.
Applications
The cable is suitable for use in networks with high requirements for bandwidth and signal quality. It supports 10-Gigabit Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s) and is therefore suitable for modern network applications such as streaming, cloud access, video surveillance or database access. The maximum bandwidth is 500 MHz, enabling high data rates and low latency. The test standard ISO/IEC 11801 Cat 6A Class Ea Channel Link is met, confirming compliance with international standards.
Functions and Equipment in Detail
The cable features an S/FTP overall shielding, consisting of an aluminium foil shielding (PiMF) for the individual conductor pairs and an aluminium braid shielding (overall shielding) around the entire cable jacket. This double shielding reduces electromagnetic interference and prevents crosstalk, which is particularly important in environments with high electromagnetic noise. The strain relief boots at both ends protect the cable from mechanical stress and prevent premature breakage. The cable jacket is made of halogen-free material (LSZH), which causes less smoke and toxic gases in case of fire.
Technology Explained Simply
The designation S/FTP (PiMF) describes the shielding type: S" stands for "Screened" (shielded), "FTP" for "Foil Twisted Pair (twisted pairs with foil). The PiMF shielding (Pairs in Metal Foil) means that each conductor pair is individually wrapped in aluminium foil. Additionally, an aluminium braid protects the entire cable jacket. This construction ensures high immunity against external interference. The wiring follows EIA/TIA-568B, ensuring a standardized conductor arrangement. The length marking on the connector facilitates identification and management of the cable in the network.
Compatibility and Accessories
The cable is suitable for Power over Ethernet (PoE and PoE+), enabling power supply over the network cable. This is relevant for IP cameras, access points or VoIP phones, for example. The connectors are equipped with latch protection to prevent the latch from catching or breaking, which increases mechanical stability. The operating temperature ranges from -20 °C to +65 °C, allowing use in indoor and outdoor environments under normal conditions. The minimum bending radius is 59 mm, which must be considered during installation.
Installation and Mounting
Installation is carried out by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The strain relief boots and the robust cable jacket facilitate handling and extend the cable's service life. The green colour of the cable jacket supports visual differentiation in complex networks. The cable length is 0.5 m, suitable for short connections such as between router and switch or PC and network port.
Advantages in Operation
The combination of double shielding, gold-plated contacts and copper conductors ensures reliable, interference-free data transmission. The LSZH jacket increases safety in case of fire. PoE support expands the range of applications, as no additional power supplies are required. The length marking on the connector and the green colour facilitate management and identification in the network. The cable is CAT-6A tested and meets the requirements of ISO/IEC 11801, confirming its quality and performance.