Further information for Goobay 91639 Cat7 Patch Cable gray S/FTP
Technical data
Connection, type
RJ45 connector (8P8C)
Connection 2, type
RJ45 connector (8P8C)
Bend protection
Ambidextrous
Pin retention protection
Ambidextrous
Connection, contact material
Gold-plated 50μm
Cable type
CAT 7 bare cable
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Conductor, material
CU (Copper)
Cable jacket, material
LSZH
Colour
Grey
Colour version
Grey
Special feature
Length indication on connector
Connection, shielding
LSZH-compliant
The Goobay Patch Cable Cat7 is a pre-assembled, double-shielded LAN cable for connecting network devices such as PCs, laptops, routers, switches, Smart TVs, gaming consoles, and NAS systems. It is suitable for home networks, home office environments, as well as professional applications where stable and high-performance data transmission is required. The cable features RJ45 connectors (8P8C) at both ends and is made with CAT 7 bulk cable, supporting a maximum bandwidth of 600 MHz. The connectors are equipped with gold-plated contacts (50 μm), ensuring a reliable and corrosion-resistant connection.
Applications
This cable is designed for use in networks with high demands on bandwidth and signal integrity. It supports 10-Gigabit Ethernet with speeds up to 10/100/1000/10000 Mbit/s and is suitable for Power over Ethernet (PoE and PoE+). This makes it particularly suitable for applications such as streaming in 8K resolution at 60 Hz or 4K at 120 Hz, for example, with gaming consoles like the Sony PlayStation 5 or Microsoft Xbox X. Its use in home networks and office environments is also ideal due to the high data rate and shielding.
Functions and Features in Detail
The cable features S/FTP shielding, consisting of an aluminium foil shield for individual wire pairs (PiMF) and an aluminium braid shield for the entire cable jacket. This double shielding minimizes electromagnetic interference and ensures clear signal transmission. The inner conductors are made of copper (CU) and are stranded (AWG 26/7), providing high conductivity and mechanical stability. The cable jacket is made of halogen-free material (LSZH), which produces lower smoke and toxicity emissions in case of fire.
Technology Explained Simply
The designation CAT 7 refers to the cable category, enabling a maximum bandwidth of 600 MHz. The RJ45 connectors are fitted with a strain relief boot that protects the cable at the connection point from bending and breakage. Additionally, a latch protection is integrated, which protects the connector's latch from catching or breaking, ensuring a stable connection. The cable length is printed directly on the strain relief boot, facilitating easy identification of the cable length.
Compatibility and Accessories
The cable is equipped with RJ45 connectors (CAT 6A, 500 MHz), which are compatible with most network devices. The use of CAT 7 bulk cable with a bandwidth of 600 MHz enables higher performance than CAT 6A, while the connectors meet the CAT 6A standard. The cables are available in various lengths and colours, with the variant described here offered in grey and 10 m length.
Installation and Mounting
Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The strain relief boots and the robust cable jacket facilitate installation, especially in tight or moving installation situations. The cables are designed for an operating temperature range of -20 °C to 65 °C, enabling use in various environments.
Operational Advantages
The double shielding and high-quality materials ensure high signal quality and low error susceptibility. Support for PoE and 10-Gigabit Ethernet expands the range of applications. The robust construction with strain relief and latch protection increases the cable's lifespan, especially in environments with frequent handling or mechanical stress. The halogen-free jacket (LSZH) meets fire safety requirements for indoor use.