Further information for Goobay 91621 Cat7 Patch Cable gray S/FTP
Technical data
Connection, contact material
Gold-plated 50μm
Connection, type
RJ45 connector (8P8C)
Connection 2, type
RJ45 connector (8P8C)
Pin retention protection
Ambidextrous
Bend protection
Ambidextrous
Cable type
CAT 7 bare cable
Conductor, material
CU (Copper)
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Cable jacket, material
LSZH
Colour
Grey
Special feature
Length indication on connector
Consumption unit
1 piece unpacked
Connection, shielding
LSZH-compliant
The Goobay Patch Cable Cat7 is a pre-assembled, double-shielded LAN cable for connecting network devices such as PCs, laptops, routers, switches, Smart TVs, gaming consoles, and NAS systems. It is suitable for home networks, home office environments, as well as professional applications where stable and high-performance data transmission is required. The cable features a CAT 7 bare cable core with a maximum bandwidth of 600 MHz, making it suitable for high data rates and future requirements. The RJ45 connectors (8P8C) at both ends are equipped with gold-plated contact surfaces (50 μm) to ensure a reliable and corrosion-resistant connection.
Applications
The cable is designed for use in networks requiring high speeds and low latency. It supports 10-Gigabit-Ethernet with data transfer rates up to 10,000 Mbit/s and is compatible with Power over Ethernet (PoE and PoE+), allowing it to also supply power to end devices such as IP cameras or access points. It is particularly suitable for applications with high requirements for image quality, such as gaming consoles with 8K resolution at 60 Hz or 4K at 120 Hz.
Functions and Features in Detail
Shielding is provided in two layers: individual wire pairs are wrapped in an aluminium foil shield (PiMF), and the entire cable is protected by an aluminium braid (S/FTP). This double shielding minimises electromagnetic interference and ensures clear signal transmission. The RJ45 connectors are fitted with latch protection to prevent the latch from catching or breaking. Additionally, strain relief boots are installed on both ends to protect the cable from mechanical stress and ensure a longer service life.
Technology Explained Simply
The cable consists of a CAT 7 bare cable, enabling a maximum bandwidth of 600 MHz. The inner conductors are made of copper (CU), ensuring high conductivity and low signal loss. This shielding standard is particularly effective against electromagnetic interference (EMI) and crosstalk. The cable jacket is made of LSZH material (low smoke zero halogen), which produces minimal smoke and does not release toxic halogens in case of fire.
Compatibility and Accessories
The cable is equipped with RJ45 connectors (8P8C), which are universally used in IT and networking technology. It is compatible with devices supporting CAT 6A or CAT 7 connectors. The use of CAT 7 bare cable in combination with CAT 6A connectors allows flexible adaptation to existing infrastructures. The cable length is 5 metres, with the length indicated directly on the strain relief boot.
Installation and Mounting
Installation is carried out by simply inserting the RJ45 connectors into the corresponding sockets of the network devices. The strain relief boots and the robust cable jacket facilitate handling and prevent damage during installation. The cable is designed for indoor use, with an operating temperature range between -20 °C and +65 °C.
Operational Advantages
The double shielding and high-quality materials ensure stable, interference-free data transmission. The gold-plated contacts ensure long service life and prevent oxidation. Support for PoE and 10-Gigabit-Ethernet expands the range of applications in modern networks. The LSZH jacket increases safety in case of fire. The grey cable is visually discreet and blends well into various environments.