Further information for Goobay 91603 RJ45 Patch Cable CAT 6A S/FTP gray
Technical data
Connection, contact material
Gold-plated 50μm
Connection, type
RJ45 connector (8P8C)
Pin retention protection
Ambidextrous
Connection 2, type
RJ45 connector (8P8C)
Cable type
CAT 7 bare cable
Conductor, material
CU (Copper)
Cable jacket, material
LSZH
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Bend protection
Ambidextrous
Colour
Grey
Special feature
Length indication on connector
Consumption unit
1 piece unpacked
Connection, shielding
LSZH-compliant
The Goobay RJ45 Patch Cable CAT 6A S/FTP (PiMF) with CAT 7 cable is a pre-assembled, double-shielded LAN cable designed for connecting network components such as PCs, laptops, routers, switches, Smart TVs, gaming consoles, and NAS systems. It is suitable for both home networks and home office environments as well as professional applications where a stable and high-performance network connection is required. The cable features a maximum bandwidth of 500 MHz and is therefore designed for high data transfer rates.
Applications
This cable is suitable for use in networks with high requirements for bandwidth and signal integrity. It is recommended for applications supporting 10-Gigabit Ethernet, as well as for devices using Power over Ethernet (PoE) or PoE+, such as IP cameras, VoIP phones, or network switches. Its use in home networks with gaming consoles requiring high-resolution video transmission (e.g. 8K @ 60 Hz or 4K @ 120 Hz) is also intended.
Functions and Features in Detail
The cable features two RJ45 connectors (8P8C) at both ends, equipped with gold-plated contacts (50 μm) to ensure a reliable electrical connection. The contact surfaces are designed to reduce corrosion and oxidation, thereby extending the lifespan of the connection. Integrated strain relief boots on both ends protect the cable from mechanical stress and prevent premature breakage. Additionally, both connectors feature a latch protection to prevent the latch from catching or breaking when inserting into sockets.
Technology Explained Simply
The cable is based on a CAT 7 cable, which supports a maximum bandwidth of 600 MHz, but is terminated with CAT 6A connectors (500 MHz). Shielding is provided in two layers: individual wire pairs are shielded with aluminium foil (PiMF – Pairs in Metal Foil), and the entire cable jacket is shielded with an aluminium braid (S/FTP). This double shielding reduces electromagnetic interference (EMI) and crosstalk, which is particularly beneficial in environments with high electromagnetic loads. The cable jacket is made of LSZH material (Low Smoke Zero Halogen), which releases minimal smoke and no toxic halogen compounds when heated or in case of fire, thereby increasing safety.
Compatibility and Accessories
The cable is compatible with all devices supporting RJ45 connectors (8P8C) and meeting the relevant network standards (e.g. ISO/IEC 11801, ANSI/TIA-568-C.2). It is suitable for PoE and PoE+ applications, allowing power to be supplied via the network cable. Use with devices supporting 10/100/1000/10000 Mbit/s is possible. The cable length is 2 m, and the colour is grey. The length indication is directly visible on the strain relief boot.
Installation and Mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets of the network components. The strain relief boots and latch protection facilitate installation and increase mechanical stability. The cable is designed for indoor use, with an operating temperature range of -20 °C to 65 °C.
Operational Advantages
Thanks to the double shielding and high-quality materials (copper conductors, gold-plated contacts, LSZH jacket), the cable offers high signal quality and durability. The use of CAT 7 cable with CAT 6A connectors enables future-proof installation, suitable even for higher bandwidth requirements. The integrated protective features (strain relief, latch protection) increase reliability and extend the cable's lifespan in daily use.