Further information for Goobay 91593 Cat7 Patch Cable yellow
Technical data
Connection, type
RJ45 connector (8P8C)
Connection 2, type
RJ45 connector (8P8C)
Bend protection
Ambidextrous
Pin retention protection
Ambidextrous
Connection, contact material
Gold-plated 50μm
Cable type
CAT 7 bare cable
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Conductor, material
CU (Copper)
Cable jacket, material
LSZH
Colour
Yellow
Special feature
Length indication on connector
Consumption unit
1 piece unpacked
Connection, shielding
LSZH-compliant
The Goobay Patch cable Cat7 is a pre-assembled, double shielded LAN cable for connecting network devices such as PCs, laptops, routers, switches, Smart-TVs, gaming consoles and NAS systems. It is suitable for home networks, home office environments as well as professional applications where stable and high-performance data transmission is required. The cable features a CAT 7 cable type with a maximum bandwidth of 600 MHz, making it suitable for 10-Gigabit-Ethernet applications with speeds up to 10000 Mbit/s. The RJ45 connectors (8P8C) at both ends are shielded to minimize electromagnetic interference. The contact surfaces of the connectors are gold-plated with 50 µm, ensuring a reliable and long-lasting connection.
Applications
The cable is designed for use in networks requiring high data rates and low latency. It is particularly recommended for applications with high demands on network stability, such as streaming in 8K resolution at 60 Hz or 4K at 120 Hz, for example when connecting gaming consoles such as the Sony PlayStation 5 or Microsoft Xbox X. Support for Power over Ethernet (PoE and PoE+) enables power supply of end devices via the network cable, simplifying the installation of devices such as IP cameras or access points.
Functions and equipment in detail
The cable is equipped with S/FTP shielding, consisting of an aluminium foil shielding for individual wire pairs (PiMF) and an aluminium braid shielding for the entire cable jacket. This double shielding reduces electromagnetic interference and ensures clean signal transmission. The inner conductors are made of copper (CU), ensuring high conductivity and signal integrity. The RJ45 connectors feature double-sided strain relief and latch protection to minimize mechanical stress and prevent the latch from breaking. The length indication is printed directly on the slimline strain relief sleeve, facilitating identification of the cable length.
Technology explained simply
The designation CAT 7 refers to the cable category, which supports a maximum bandwidth of 600 MHz. This enables data transfer rates up to 10 Gbit/s over short to medium distances. The S/FTP shielding (Screened/Foiled Twisted Pair) provides a high level of protection against electromagnetic interference, making the cable suitable for use in environmentally sensitive areas. The 50 µm gold plating of the contact surfaces ensures a corrosion-resistant and conductive connection that remains stable even with frequent plugging and unplugging. The LSZH cable jacket (Low Smoke Zero Halogen) is halogen-free and produces little smoke and no toxic gases when heated or in case of fire, making it suitable for indoor use.
Compatibility and accessories
The cable is compatible with network devices that support RJ45 connectors (8P8C). It can be connected to devices complying with the standards ISO/IEC 11801 and ANSI/TIA-568-C.2. The use of CAT 7 cable with CAT 6A connectors (500 MHz) allows flexible adaptation to existing infrastructures, although the maximum bandwidth of the cable (600 MHz) is limited by the connectors. The cables are available in various lengths and colours, with the model described here offered in yellow colour and a length of 1.5 m.
Installation and mounting
Installation is carried out by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The strain relief sleeves and the stable cable jacket protect the cable from mechanical stress, especially during bending or tension. The latch protection function prevents the latch from catching or breaking, increasing the longevity of the connection. The cables are designed for an operating temperature range of -20 °C to 65 °C, enabling use in various environments.
Advantages in operation
The Goobay Patch cable Cat7 offers a reliable and high-performance network connection with high data rates and low latency. The double shielding ensures clean signal transmission, even in interference-prone environments. The gold-plated contacts and stable cable jacket increase the cable's lifespan. Support for PoE and 10-Gigabit-Ethernet expands the range of applications in modern networks. The clear length indication on the connector facilitates identification and organization in the network.