Further information for Goobay 91585 Cat7 Patch Cable gray S/FTP
Technical data
Connection, contact material
Gold-plated 50μm
Connection, type
RJ45 connector (8P8C)
Connection 2, type
RJ45 connector (8P8C)
Pin retention protection
Ambidextrous
Bend protection
Ambidextrous
Cable type
CAT 7 bare cable
Conductor, material
CU (Copper)
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Cable jacket, material
LSZH
Colour
Grey
Special feature
Length indication on connector
Consumption unit
1 piece unpacked
Connection, shielding
LSZH-compliant
The Goobay Patch cable Cat7 is a pre-assembled, double-shielded LAN cable for connecting network devices such as PCs, laptops, routers, switches, Smart-TVs, gaming consoles, and NAS systems. It is suitable for home networks, home office environments, as well as professional applications where stable and high-performance data transmission is required. The cable features a CAT 7 bare cable core supporting a maximum bandwidth of 600 MHz, and is equipped with RJ45 connectors (8P8C) specified for CAT 6A (500 MHz). The connection is made via gold-plated contact surfaces with a thickness of 50 μm, ensuring reliable electrical conductivity and corrosion protection.
Applications
This cable is designed for applications requiring high bandwidth and signal integrity. It supports 10-Gigabit-Ethernet with speeds up to 10/100/1000/10000 Mbit/s and is suitable for Power over Ethernet (PoE and PoE+), enabling it to also supply power to network devices via the cable itself. It is particularly suitable for gaming consoles transmitting high-resolution video signals (e.g. 8K @ 60 Hz or 4K @ 120 Hz), as the high bandwidth and low latency ensure image quality and responsiveness.
Functions and Features in Detail
The cable features S/FTP shielding, consisting of an aluminium foil shield (PiMF) for individual wire pairs and an aluminium braid shield (overall shield) around the entire cable jacket. This double shielding minimises electromagnetic interference and crosstalk, enhancing signal quality even in sensitive environments. The RJ45 connectors are equipped with latch protection to prevent the latch from catching or breaking, improving the mechanical stability and longevity of the connection. Crush protection sleeves on both ends protect the cable from mechanical stress and prevent premature breakage at the connector joints.
Technology Explained Simply
The cable core consists of a CAT 7 bare cable enabling a maximum bandwidth of 600 MHz. The inner conductors are made of copper (CU) with a diameter of 7/0.15 mm (AWG 26/7), ensuring high conductivity and low signal loss. Shielding follows the S/FTP principle: each wire pair is wrapped in aluminium foil (PiMF), and the entire cable jacket is additionally shielded with an aluminium braid. This protects data transmission from external electromagnetic interference. The cable jacket is made of LSZH material (low smoke zero halogen), ensuring minimal smoke development and no release of toxic halogens in case of fire.
Compatibility and Accessories
The cable is compatible with all devices supporting RJ45 connectors (8P8C), including routers, switches, network and home network devices. It is designed for use in networks supporting 10-Gigabit-Ethernet, PoE, and PoE+. Use in combination with other Goobay products, such as other patch cables or network sockets, is possible as long as the connection standards match. The cable length is 1 metre, with the length indicated directly on the crush protection sleeve.
Installation and Mounting
Installation is done by simply plugging the RJ45 connectors into the corresponding sockets on network devices. The crush protection sleeves and latch protection facilitate installation and increase mechanical stability. The cable is intended for indoor use, with an operating temperature range of -20 °C to 65 °C, allowing use under normal environmental conditions. The grey colour of the cable jacket supports visual integration into existing network infrastructures.
Operational Advantages
The double shielding and high-quality materials ensure high signal integrity and low error susceptibility. The gold-plated contacts and crush protection design increase the cable’s lifespan. Support for PoE and 10-Gigabit-Ethernet expands application possibilities, especially in modern networks with high data rates. The LSZH material enhances safety in fire hazards, as it does not release toxic gases.