Goobay 91093, EAN: 4040849910937

Goobay 91093 Cat7 Patch Cable white

Cables > Data lines > Cat7 Patch Cables

Goobay 91093 Cat7 Patch Cable white

Lieske Part No. 498615
Mfg Part No 91093
EAN-Code 4040849910937
Manufacturer Goobay
Here only 2,27 EUR
2,70 EUR incl. VAT

Further information for Goobay 91093 Cat7 Patch Cable white

Technical data
Connection, contact materialGold-plated 50μm
Connection, typeRJ45 connector (8P8C)
Pin retention protectionAmbidextrous
Connection 2, typeRJ45 connector (8P8C)
Cable typeCAT 7 bare cable
Conductor, materialCU (Copper)
Cable jacket, materialLSZH
Type 1, shieldingFilm (Alu) PiMF
Type 2, shieldingBraided (Alu) overall shield
Bend protectionAmbidextrous
ColourWhite
Special featureLength indication on connector
Consumption unit1 piece unpacked
Connection, shieldingYes
LSZH-compliantYes
The Goobay patch cable Cat7, type 91093, is a pre-assembled, double-shielded LAN cable with a cable length of 2 m. It is used to connect network devices such as PCs, laptops, routers, switches, Smart TVs, gaming consoles, and NAS systems in home networks, home office environments, and professional IT infrastructures. The cable is based on a CAT 7 raw cable, which supports a maximum bandwidth of 600 MHz, and is equipped with RJ45 connectors (8P8C) specified for CAT 6A (500 MHz). The connection is made via high-quality, gold-plated contact surfaces with a layer thickness of 50 μm, ensuring a stable and conductive connection.

Applications

The cable is designed for applications in high-speed networks, particularly for devices requiring high data rates and low latency, such as modern gaming consoles with 8K resolution at 60 Hz or 4K at 120 Hz. It is suitable for 10-Gigabit-Ethernet transmissions with speeds up to 10/100/1000/10000 Mbit/s and supports Power over Ethernet (PoE and PoE+), enabling it to also supply power to network devices via the cable.

Functions and Equipment in Detail

The cable features S/FTP shielding, consisting of an aluminium foil shield (PiMF) for individual wire pairs and an aluminium braid shield (overall shield) around the entire cable jacket. This double shielding protects data transmission from electromagnetic interference and ensures high signal integrity. The inner conductors are made of copper (CU) with a strand cross-section of AWG 26/7, providing good electrical conductivity and low signal loss. The cable jacket is made of LSZH material (Low Smoke Zero Halogen), which releases minimal smoke and no toxic halogens when heated or in case of fire, making it suitable for indoor use.

Technology Explained Simply

The designation CAT 7 refers to the cable category, supporting a maximum bandwidth of 600 MHz, which enables high data rates and low latency. The RJ45 connectors are equipped with a latch nose protection, preventing the latch nose from catching or breaking, thus ensuring a secure connection in the network. The strain relief boots at both ends protect the cable from mechanical stress and prevent premature breakage. The length indication is printed directly on the strain relief boot, facilitating easy identification of the cable length.

Compatibility and Accessories

The cable is compatible with all devices that support RJ45 connectors (8P8C). It can be used in networks utilizing 10-Gigabit-Ethernet, PoE, or PoE+. The use of CAT 7 raw cable with CAT 6A connectors allows flexible integration into existing infrastructures based on CAT 6A without compromising the performance of the CAT 7 cable.

Installation and Mounting

Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets of the network devices. The strain relief boots and latch nose protection facilitate handling and extend the cable's lifespan. The cables are delivered unpackaged and can be used immediately.

Operational Advantages

The double shielding and high-quality materials ensure reliable, interference-free data transmission. PoE support enables power supply to devices via the network cable, simplifying installation. The use of LSZH material reduces fire hazard and smoke development in case of fire. The cable length of 2 m provides sufficient flexibility for typical applications in offices, living rooms, or server rooms.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/498615
qrcode für Goobay 91093 Cat7 Patch Cable white