Goobay 30633, EAN: 4040849306334

Goobay 30633 LED Power Supply 24V 15W

Light Systems > Accessories > LED-Drivers 24V

Goobay 30633 LED Power Supply 24V 15W

Lieske Part No. 660231
Mfg Part No 30633
EAN-Code 4040849306334
Manufacturer Goobay
Here only 11,49 EUR
13,67 EUR incl. VAT

Further information for Goobay 30633 LED Power Supply 24V 15W

Technical data
DimmabilityNot dimmable
Input, typeScrew terminals
Output, typeScrew terminals
Colour versionwhite-orange
ColourWhite, orange
ApplicationsFurniture installation
Special featureConstant voltage (for parallel connection)
Consumption unit1 piece per carton
Packaging typeRetail box
Packaging languagesde, en, fr, it, es, nl, da, sv, cs, pl
Operating instructions languagesde, en, fr, it, es, nl, da, sv, cs, pl
Max. power15 W
Input, number2
Input, cross-section0.75 mm²
Output voltage (DC)24 V
The Goobay LED transformer SET 24-15 LED (manufacturer number 30633) is a compact DC transformer for operating LED luminaires with a constant output voltage of 24 V (DC). It is specifically designed for indoor use and is suitable for powering LED strips, LED modules, or other luminaires requiring a fixed DC voltage. The maximum output power is 15 W, and the transformer can operate without a minimum load, allowing flexible adaptation to different loads.

Applications
This LED transformer is approved for installation in furniture and can be mounted, for example, behind cabinets or in other enclosed compartments. Its flat design and low heat generation allow space-saving installation, even in confined spaces. It is intended for indoor use and complies with protection class IP20, providing protection against finger contact and solid foreign objects, but not against water or dust.

Functions and equipment in detail
The transformer delivers a constant voltage (CV), making it particularly suitable for parallel connections of LED modules or strips. This allows the length of LED strips to be flexibly adjusted without affecting the voltage at individual LEDs. The integrated screw terminals enable simple and secure connection of input and output cables. The cable cross-sections are 0.75 mm², which is sufficient for a stable connection at the maximum power of 15 W.

Technology explained simply
The transformer converts mains voltage of 200–240 V (AC) into a safe DC voltage of 24 V (DC). The output voltage is stabilized with a tolerance of ±5 %, ensuring uniform brightness of the LEDs. The ripple of the output voltage is ±4 % (peak-to-peak), which is sufficient for powering LED technology. The efficiency at full load is 84.2 %, indicating efficient energy conversion. In no-load condition, the transformer consumes 0.45 W, representing low energy loss. Cooling is achieved through natural convection, so no additional fans or active cooling components are required.

Compatibility and accessories
The LED transformer is designed for LED modules with their own ballast electronics and for parallel connections. It is not dimmable, meaning it cannot be operated with dimmers or other control devices for brightness adjustment. The electrical isolation is Class II, ensuring safe insulation between primary and secondary sides. Additionally, overvoltage and short-circuit protection are integrated to protect the device and connected LED luminaires from damage.

Mounting and installation
Mounting is done by securing to a flat surface, for example, inside furniture or in enclosed enclosures. Dimensions are 103 mm (length) × 35.5 mm (width) × 16 mm (height), allowing the transformer to fit even in limited space. The operating temperature range is -20 °C to +45 °C, and the storage temperature range is -40 °C to +85 °C. The operating humidity is 10 % to 90 % relative humidity.

Advantages in operation
The transformer is characterized by high operational reliability, low heat generation, and compact design. Simple mounting via screw terminals and the ability to integrate it into furniture make it a practical solution for built-in applications. The nominal service life is 30,000 hours, indicating a long service duration. The use of H03VVH2-F cables with a cross-section of 2×0.75 mm² ensures safe and reliable power supply.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/660231
qrcode für Goobay 30633 LED Power Supply 24V 15W