Goobay 30612, EAN: 4040849306129

Goobay 30612 LED Power Supply 24V 20W

Light Systems > Accessories > LED-Drivers 24V

Goobay 30612 LED Power Supply 24V 20W

Lieske Part No. 660216
Mfg Part No 30612
EAN-Code 4040849306129
Manufacturer Goobay
Here only 10,91 EUR
12,98 EUR incl. VAT

Further information for Goobay 30612 LED Power Supply 24V 20W

Technical data
DimmabilityNot dimmable
Input, typeScrew terminals
Output, typeScrew terminals
Colour versionwhite-orange
ColourWhite, orange
ApplicationsFurniture installation
Special featureConstant voltage (for parallel connection)
Consumption unit1 piece per carton
Packaging typeRetail box
Packaging languagesde, en, fr, it, es, nl, da, sv, cs, pl
Operating instructions languagesde, en, fr, it, es, nl, da, sv, cs, pl
Max. power20 W
Input, number2
Input, cross-section0.75 mm²
Output voltage (DC)24 V
The Goobay LED power supply SET 24-20 LED slim (manufacturer number 30612) is a compact DC power supply for supplying LED lighting with a constant voltage of 24 V (DC). It is specifically designed for indoor use and is ideal for installation in furniture, for example behind cabinets or in drawers, where discreet and space-saving mounting is required. The flat design and low heat generation allow installation even in confined spaces without additional cooling. The transformer delivers a maximum power of 20 W and is therefore suitable for LED strips or LED modules with a total load up to 20 W. It operates without a minimum load, enabling flexible use with variable loads.

Applications
This LED power supply is intended for use in furniture installations where a discreet and safe power supply for LED lighting is required. It is approved for indoor use and complies with protection class IP20, protecting it against contact with fingers and solid foreign objects. Typical applications include LED strips operated in parallel configurations or LED modules with their own pre-regulation electronics. The constant output voltage of 24 V (DC) allows flexible adjustment of lighting length, as individual LEDs or sections of strips can be added or removed without adjusting the power supply.

Functions and Equipment in Detail
The transformer features integrated screw terminals at both input and output, enabling simple and secure connection to the mains (200–240 V AC) and to the LED load. The terminals are designed for a cable cross-section of 0.75 mm², which is sufficient for most standard applications. The output voltage is 24 V (DC) with a tolerance of ±5 %, ensuring stable supply to the LED load. The ripple of the output voltage is ±4 % (peak-to-peak), which is acceptable for most LED applications. The maximum output power is 20 W, corresponding to a maximum output current of 0.83 A.

Technology Explained Simply
The transformer operates as a constant voltage regulator (Constant Voltage, CV), meaning it delivers a fixed output voltage of 24 V (DC) regardless of the load. This is particularly advantageous in parallel configurations, where individual LED modules or strip sections can be connected independently without affecting the voltage at other modules. The electronic isolation according to safety class II ensures safe insulation between primary and secondary sides, allowing operation without a protective earth conductor. Additionally, overvoltage and short-circuit protection are integrated to protect the device and connected LED loads from damage. Cooling is achieved by natural convection, increasing maintenance-free operation.

Compatibility and Accessories
The LED power supply is designed for LED modules with fixed voltage and their own series resistor. It is not dimmable, meaning it cannot be connected to dimmers or other control devices for brightness regulation. The application is exclusively for indoor use, as protection class IP20 does not provide waterproofing or protection against splashing water. The operating temperature range is between -20 °C and +45 °C, and storage is possible between -40 °C and +85 °C. The nominal lifespan is 30,000 hours.

Mounting and Installation
Mounting is done via the integrated screw terminals, enabling quick and secure connections. The flat design (dimensions: 103 x 35.5 x 16 mm) allows space-saving installation, for example in furniture or behind panels. The use of cables with a cross-section of 0.75 mm² (type H03VVH2-F) is intended. Installation is to the mains (200–240 V AC, 50/60 Hz) and to the LED load. The no-load power consumption is 0.40 W, ensuring low energy consumption in standby mode.

Advantages in Operation
The transformer offers high operational safety thanks to integrated protection functions and stable output voltage. The flat design and low heat generation allow discreet installation in confined spaces. The absence of a minimum load requirement enables flexible load adjustment without additional components. Safety class II and electronic isolation increase operational safety. The maximum power of 20 W is sufficient for many standard applications in furniture installations and workstations.

Color Variant and Design
The LED power supply is available in a white-orange color variant, with the housing color being white and the terminals marked orange. This color coding facilitates identification and safe cable connection. The design is functional and compact to minimize space requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/660216
qrcode für Goobay 30612 LED Power Supply 24V 20W