Further information for fischerwerke 060638 Zykon drill bit FZUB 22x125
General
Drill bit diameter
22 mm
Drilling depth
125 mm
Material of use
Concrete
Compatibility
FZA, FZA-I, FZEA
Stop plate
Hinge
Compliance with approval
The Fischer Zykon drill type 060638 is a special drill for creating undercut holes in concrete. It is intended for the approval-compliant installation of Zykon undercut anchors FZA, FZA-I and FZEA. The drill is specifically designed for use in concrete structures to ensure the necessary geometry for the secure anchoring of these anchors.
Special drill for concrete: The drill enables the precise creation of conically undercut holes, which are required for the correct function of the Zykon undercut anchors. The conical shape of the hole ensures that the anchor achieves a secure fit when inserted into the hole and that loads are evenly distributed over the anchoring surface.
Stop plate and hinge: The drill features an integrated stop plate that ensures the exact depth of the hole. The hinge allows for flexible and quick alignment of the drill, enabling precise drilling even on uneven surfaces. This design reduces installation time and increases drilling accuracy.
Approval-compliant installation: The use of this drill is a prerequisite for the approval-compliant installation of the specified Zykon undercut anchors. The drilling must exactly meet the requirements of the approval to ensure the load-bearing capacity and safety of the anchoring. The drill is therefore an integral part of the installation system.
Applications: The drill is used in the construction industry, particularly for fastening components in concrete, such as in the installation of metal structures, machine foundations or safety railings. It is designed for use with electric drills that provide sufficient speed and torque for drilling in concrete.
Compatibility and accessories: The drill is specifically developed for use with the Zykon undercut anchors FZA, FZA-I and FZEA. These anchors require a specific hole geometry, which can only be achieved with a suitable special drill such as the FZUB 22x125. The combination of drill and anchor ensures that the anchoring meets technical requirements.
Installation and mounting: Installation is carried out by drilling the hole with the FZUB drill, where the stop plate controls the drilling depth. After drilling, the anchor is inserted into the hole and anchored using a hammer or a special insertion device. The hole must be clean and free of concrete dust to ensure the anchor's adhesion.
the hole must be clean and free of concrete dust to ensure the anchor's adhesion.
Advantages in operation: The use of the FZUB drill reduces installation time, as the drilling can be performed precisely and quickly. The integrated stop plate and hinge increase accuracy and facilitate work, especially on uneven or hard-to-reach surfaces. The approval-compliant creation of the hole ensures the long-term stability and safety of the anchoring.