| General |
| Input voltage | 24 V DC |
| Input current | 7 mA |
| Output voltage | 1,5-33 V DC |
| Output continuous current | 6 A |
| Switching function | 1-pole normally open contact (NO) |
| Contact material | AgNi |
| Rated power coil | 0,17 W |
| Voltage rating input/output | 3000 V AC |
| Ambient temperature | -40...+85 °C |
| Relay protection class | RT III |
| Mechanical life | 10 · 10⁶ Switching operations |
| Electrical life AC1 | 60 · 10³ Switching operations |
| Response/recoil time | 5/3 ms |
| Minimum switching load | 50 mW |
| Construction type | narrow, 5 mm wide |
| Mounting | PCB or socket series 93, 35 mm mounting rail (EN 60715) |
The Finder relay type 34.81.7.024.9024 is a narrow plug-in/printed circuit relay of series 34, designed as an electronic relay (SSR, Solid State Relay). It is used for contactless switching of loads in industrial applications, particularly in controls for packaging machines, labelling devices, burner and boiler controls, as well as in electronic assemblies. The device is intended for mounting on printed circuit boards or on sockets of series 93 and can also be mounted on a support rail according to EN 60715. The narrow design with a width of 5 mm allows for compact placement in tight assemblies.
Applications
The relay is designed for use in industrial control systems where reliable, disturbance-free and maintenance-free switching of loads is required. It is particularly suitable for applications where mechanical contacts should be avoided, such as in environments with high switching frequencies or when controlling sensitive electronic components. Application areas include, among others, street and tunnel lighting, programmable logic controllers (PLC), as well as time switches and light control systems.
Functions and equipment in detail
The relay features an electronic circuit enabling contactless switching. The input voltage is 24 V DC, with an input current of 7 mA. The output voltage can range from 1.5 V to 33 V DC, with a maximum continuous output current of 6 A. The switching function is performed via a single-pole make contact. The device is designed for a minimum switching load of 50 mW (5 V / 2 mA), enabling safe switching even with very small loads. The contact materials consist of AgNi, ensuring high contact stability and long service life.
Technology explained simply
As a Solid State Relay (SSR), the device operates without moving mechanical contacts, instead using semiconductor components. This results in a noiseless and fast switching process, which is particularly advantageous at high switching frequencies. The electrical service life is significantly higher than that of mechanical relays, as no mechanical wear occurs. The relay coil has a rated power of 0.17 W, meaning low energy consumption and minimal heat generation. The voltage rating between input and output circuits is 3000 V AC, ensuring high galvanic isolation. The ambient temperature range is from -40 °C to +85 °C, enabling broad application in various environments.
Compatibility and accessories
The relay is designed for mounting on sockets of series 93, which offer various connection types such as screw connection, spring clamp, or Push-In terminal. Compatible sockets include, for example, 93.11 (printed circuit connection), 93.01.0.024 (screw connection), 93.60.7.024 (Push-In terminal), 93.63.7.024 (screw connection), 93.51.7.024 (spring clamp), 93.01.7.024 (screw connection), 93.51.0.024 (spring clamp), 93.61.7.024 (screw connection), and 93.67.7.024 (Push-In terminal). These sockets allow flexible and secure connections to printed circuit boards or support rails.
Mounting and installation
Mounting is done either directly onto a printed circuit board or onto a socket of series 93. When mounting on a support rail (35 mm according to EN 60715), a socket is required. Installation does not require special tools, as the sockets are equipped with various terminal types (screw, spring clamp, or Push-In). The terminal connections allow for quick and secure wiring connections.
Advantages in operation
The relay offers high operational reliability through contactless switching, which increases service life and reduces maintenance effort. The low energy consumption of the coil (0.17 W) results in minimal heat generation, reducing thermal stress on the assembly. The galvanic isolation between input and output circuits (3000 V AC) protects control electronics from interference. The relay protection class RT III ensures high safety when switching loads. The operating temperature range of -40 °C to +85 °C enables use in a wide variety of environments, including industrial plants with extreme temperatures.