| General |
| Number of contacts | 1 change-over contact |
| Max. continuous current | 6 A |
| Nominal voltage | 250 V AC |
| Coil voltage | 60 V DC |
| Rated power | 0,170 W |
| Coil resistance | 19700 Ohm |
| Relay protection class | RT III |
| Ambient temperature | -40…+85 °C |
| Voltage strength coil/contacts | 6 kV |
| Voltage withstand open contacts | 1000 V AC |
| Mechanical life | 10 · 10⁶ Switching operations |
| Electrical life AC1 | 60 · 10³ Switching operations |
| Response time | 5 ms |
| Reset time | 3 ms |
| Construction type | narrow, 5 mm wide |
| Mounting method | circuit board or 35 mm mounting rail (EN 60715) |
| Max. switching capacity AC1 | 1500 VA |
| Max. switching power AC15 (230 V AC) | 300 VA |
| Minimum switching load | 500 mW |
| DC operating range | 0,7…1,5 U_N |
| Hold voltage DC | 0,4 U_N |
| Drop voltage DC | 0,05 U_N |
The Finder plug-in/PCB relay type 34.51.7.060.0000 is a narrow, single-pole relay with 1 changeover contact, designed for use in industrial control systems. It features a coil rated voltage of 60 V DC and is rated for a maximum continuous load of 6 A at 250 V AC. The relay is characterised by a compact design with a width of 5 mm, making it particularly suitable for space-saving installation in control systems, packaging machines, labelling devices or burner controls. The contact materials consist of AgSnO₂, a cadmium-free alloy material that ensures high switching capacity and long service life. The relay protection class RT III ensures a wash-resistant design, enabling use in environments with increased humidity or cleaning processes.
Applications
The relay is designed for use in electronic assemblies, programmable controllers, time switches and lighting controls. It is particularly suitable for applications in the packaging industry, filling systems, street and tunnel lighting, as well as boiler and oven controls. The narrow design and the possibility of mounting on printed circuit boards or on support rails (35 mm according to EN 60715) allow flexible integration into existing systems. The coil is designed for a rated power of 0.170 W, representing a low energy consumption value.
Functions and equipment in detail
The relay features a single-pole changeover contact rated for a maximum switching capacity of 1500 VA at AC1 and 300 VA at AC15 (230 V AC). The maximum switching voltage is 400 V AC, and the maximum switching capacity at direct voltage (DC1) is 6 A at 24 V, 0.2 A at 110 V and 0.12 A at 220 V. The minimum switching load is 500 mW (12 V / 10 mA). The pickup and drop-out time is 5 ms and 3 ms respectively, enabling a fast response to control signals. The mechanical life is 10 million switching operations, and the electrical life at AC1 operation is 60,000 switching operations.
Technology explained simply
The relay coil is operated at 60 V DC and has a resistance of 19700 Ohm. The rated power is 0.170 W, representing a very sensitive coil that responds even to low control voltages. The operating voltage range is between 0.7 and 1.5 times the rated voltage, the holding voltage is 0.4 times the rated voltage, and the drop-out voltage is 0.05 times the rated voltage. The voltage withstand between coil and contacts is 6 kV (1.2/50 μs), ensuring high insulation performance. The open contacts are voltage withstand rated for 1000 V AC. The ambient temperature can range from -40 °C to +85 °C, enabling broad applicability under various climatic conditions.
Compatibility and accessories
The relay can be mounted directly onto printed circuit boards or secured via sockets of series 93 onto support rails (35 mm according to EN 60715). Compatible sockets include, for example, the 93.01.7.060 (screw connection, 48–60 V DC), the 93.51.7.060 (spring clamp, 48–60 V DC) or the 93.11 (PCB connection). The sockets allow flexible control with AC/DC voltage. The combination of relay and socket may be UL-certified in some versions.
Mounting and installation
Mounting is done either directly onto the printed circuit board or via a socket of series 93 onto a support rail (35 mm according to EN 60715). The sockets offer various connection types such as screw connection, spring clamp or push-in terminal. Installation requires no additional tools, as the sockets are standardised for easy mounting. The narrow design of 5 mm allows dense placement in control enclosures.
Advantages in operation
The relay offers high switching capacity at low coil power, increasing energy efficiency. The long service life and high mechanical durability ensure reliable function over many operating cycles. The wash-resistant design (RT III) enables use in environments with increased humidity or during cleaning processes. Compatibility with various sockets of series 93 offers flexibility when integrating into existing systems.