| General |
| Degree of protection | IP 20 |
| Operating voltage | 24 V AC/DC |
| Rated current | 63 A |
| Nominal voltage | 440 V AC |
| Contact material | AgSnO2 |
| Max. starting current | 240 A |
| Switch-on time | 5 ms |
| Max. switching capacity AC1-AC-7a | 24 kVA |
| Rated current AC3-AC7b | 30 A |
| Permissible load incandescent and halogen lamps | 5000 W |
| Permissible load for fluorescent lamps with EVG | 2000 W |
| Permissible load energy-saving lamps | 1500 W |
| Permissible load LED | 1500 W |
| Permissible load for NV halogen lamps or LED with EVG | 1500 W |
| Permissible load for NV halogen lamps or LED with KVG | 2000 W |
| Contact arrangement | 2 normally open contacts + 2 normally closed contacts (NO+NC) |
| Response time | 30 ms |
| Reset time | 20 ms |
| Voltage strength coil/contacts | 6 kV |
| Ambient temperature | -25 to +50 °C |
| DIN rail | 35 mm |
| Control | AC/DC ripple-free |
| Protection circuitry | Varistor (voltage-sensitive resistor) |
| Insulation | reinforced between coil and contacts |
| Indication | mechanical switching position indicator |
| Expandable with | auxiliary switch 022.65 (1S+1Ö 6A) |
| Complies with standards | EN 61095:2009-11, EN 45545-2 + A1:2016 |
The installation contactor of Finder's series 22, type 22.64.0.024.4610, is a rail-mounted device for installation on a 35 mm support rail. It is used for the electrical control and switching of loads in industrial, commercial, and building automation systems. The device features four contacts: two NO and two NC, and is rated for a nominal current of 63 A at a rated voltage of 440 V AC. The contact materials consist of AgSnO₂, ensuring a long service life even under high inrush currents. The maximum inrush current is 240 A within 5 ms, making it suitable for applications with high inrush currents such as lamp loads.
Applications
This contactor is intended for a wide range of applications in building and process control, including lighting control systems in hotels, offices, bathrooms, or parking garages, as well as pump control and street lighting. It is particularly suitable for loads with high inrush currents, such as incandescent and halogen lamps, fluorescent lamps with electronic ballasts (EVG) or conventional ballasts (KVG), energy-saving lamps, and LED lighting. The maximum switching capacities at 230 V AC are 24 kVA for switching types AC1 to AC-7a. For single-phase motor loads (AC3), the rated current is 30 A.
Functions and Features in Detail
The device includes a mechanical switching position indicator, which visually displays the current state of the contactor (on or off). The coil is designed for an operating voltage of 24 V AC/DC, allowing control via either alternating or direct current. The internal circuitry enables hum-free operation, regardless of the voltage type. A varistor is integrated at the input as protective circuitry to suppress overvoltages. The insulation between the coil and contacts is reinforced to ensure safe isolation.
Technical Explanation
The contact type is designed as a bridge contact, with a minimum contact gap of 3 mm for NO contacts and 1.5 mm for NC contacts. The AgSnO₂ contact material is particularly suitable for high inrush currents due to its high thermal conductivity and excellent switching durability. The maximum switching capacity at 230 V AC is 24 kVA, enabling use with high-power loads. The electrical life at switching type AC-7a is 30,000 operations, while the mechanical life is 2 million operations. The pickup and release time are 30 ms and 20 ms, respectively. The voltage withstand between coil and contacts is 6 kV (1.2/50 μs). The ambient temperature range is from –25 °C to +50 °C.
Compatibility and Accessories
The contactor can be extended with an auxiliary switch from series 022.65, which can be clipped to the side of the device. This auxiliary switch provides an additional contact configuration with one NO and one NC contact, each rated for 6 A. This extension allows integration of additional control or signaling functions. The device complies with standards EN 61095:2009-11 and EN 45545-2 + A1:2016, which regulate the fire behavior of materials and components in rail vehicles.
Mounting and Installation
Mounting is performed on a standardized 35 mm support rail in accordance with EN 60715. The device width is 53.5 mm. The mechanical indicator allows for easy visual monitoring of the operating state. The coil can be operated via AC or DC, with an operating voltage of 24 V. Control is achieved via the integrated internal circuitry, which operates hum-free. The protection class IP 20 ensures protection against finger contact and solid foreign objects, but not against water or dust.
Operational Advantages
The contactor offers high switching durability and reliability under heavy loads. The use of AgSnO₂ as contact material ensures a long service life, especially under high inrush currents. The hum-free operation via AC/DC and the integrated protective circuitry with varistor enhance operational safety. The mechanical indicator simplifies maintenance and diagnostics. The expandability with an auxiliary switch provides flexibility in system design. Compliance with standards EN 61095 and EN 45545-2 makes the device suitable for use in rail vehicles.