| General |
| Degree of protection | IP 20 |
| Rated current | 63 A |
| Nominal voltage | 440 V AC |
| Coil voltage | 24 V AC/DC |
| Number of contacts | 4 Normally open contact (NO) |
| Max. starting current | 240 A |
| Switch-on time | 5 ms |
| Maximum switching power (AC1-AC-7a, 230 V AC) | 24 kVA |
| Rated current (AC3-AC7b) | 30 A |
| Maximum power for incandescent and halogen lamps | 5000 W |
| Max. power for fluorescent lamps with EVG | 2000 W |
| Maximum power for energy-saving lamps | 1500 W |
| Maximum power for LED (230 V AC) | 1500 W |
| Max. power for NV halogen lamps or LED with EVG | 1500 W |
| Max. power for NV halogen lamps or LED with KVG | 2000 W |
| Ambient temperature | -25…+50 °C |
| DIN rail | 35 mm |
| Control | AC/DC |
| Switch position indicator | Mechanical |
| Approval | EN 61095:2009-11 |
The installation contactor of the Finder series 22, type 22.64.0.024.4310, is a
rack-mounted device for mounting on a 35 mm support rail, commonly used in electrical installations. It features
4 NO contacts and is rated for a
nominal current of 63 A at 440 V AC. The device is used for the
electrical control and switching of loads in various applications, such as lighting technology, pump control, or lighting control for offices and bathrooms. The
coil is rated for 24 V AC/DC, enabling flexible actuation, for example, via a control or automation unit. The
mechanical switching position indicator allows visual verification of the switching state without additional measuring instruments. The
relay protection class IP 20 ensures protection against finger contact and solid foreign objects, but not against water or dust – thus, the device is intended for use in enclosed, dry indoor environments.
Applications include the control of lighting systems, particularly in hotels, offices, or parking garages, where central or automated switching control is required. It is also suitable for controlling pumps and other electrical consumers with high inrush currents. The
maximum switching capacity at 230 V AC is 24 kVA for switching types AC1 to AC-7a, enabling high load capacity for various load types. For incandescent and halogen lamps, a maximum power of 5000 W is permitted, and for fluorescent lamps with electronic ballast (EB), up to 2000 W. Energy-saving lamps, LED lighting (230 V AC), as well as NV halogen lamps or LED with EB or conventional ballast (CB) can also be operated with this contactor, with maximum powers varying depending on the ballast.
Functions and equipment in detail include the use of
AgSnO₂ as contact material, suitable for high switching capacities and long service life under high inrush currents. The
maximum inrush current is 240 A within 5 ms, making the device particularly suitable for applications with high inrush peaks, such as lamps or motors. The
reinforced insulation between coil and contacts increases safety and prevents unwanted electrical arcing. Internal wiring enables
hum-free actuation with both AC and DC voltage, facilitating integration into various control systems. A
varistor at the input protects the device against transient voltage surges.
Technology explained simply shows that the contactor features a mechanical indicator displaying the state (on/off) visually. The coil is operated at 24 V AC/DC, enabling universal actuation. The switching capacity of 24 kVA at 230 V AC is sufficient for many industrial and commercial applications. The contact gap for NO contacts is at least 3 mm, ensuring reliable disconnection. The
electrical service life for switching type AC-7a is 30,000 switching operations, indicating high load capacity. The
mechanical service life is 2 million switching operations, enabling long-term use under normal operating conditions.
Compatibility and accessories include the option to extend the device with an
auxiliary switch 1NO+1NC 6A, which can be clipped on the side of the installation contactor. This enables integration of additional switching functions, for example, for signals or feedback in control systems. The extension is tool-free and quick to install. The device complies with the standard
EN 61095:2009-11 and is also suitable for use in rail vehicles according to
EN 45545-2 + A1:2016, indicating potential application in rail vehicle technology.
Mounting and installation is carried out on a 35 mm support rail, standard in electrical installations. The device width is 53.5 mm, allowing placement in standard switchboards. Mounting requires no additional tools, as the device features clamps for securing to the rail. Actuation is via the coil, operated at 24 V AC/DC. Wiring of contacts is done via the designated terminal clamps.
Operational advantages include high switching capacity, long service life, and universal actuation capability. The use of AgSnO₂ as contact material ensures high reliability under heavy loads. The mechanical indicator simplifies maintenance and diagnostics. Compatibility with various load types, including modern LED and energy-saving lamps, makes the device versatile. Compliance with standards EN 61095 and EN 45545-2 ensures safety and reliability in various operating environments.