The Finder installation relay type 22.23.9.024.4000 is a mounting device for installation on a 35 mm support rail, commonly used in electrical installations. It is designed for controlling electrical loads in industrial, commercial, and building automation environments. The relay features one normally open (NO) and one normally closed (NC) contact, with contacts made of AgSnO2, a contact material particularly suitable for high inrush currents and lamp loads. The maximum continuous current rating is 20 A at 250 V AC, making it suitable for various applications in lighting control, pump control, or lighting systems in hotels, offices, or parking garages.
Applications
This relay is designed for use in installations requiring reliable switching performance under medium to high loads. Typical applications include controlling incandescent and halogen lamps, fluorescent lamps with electronic or conventional ballasts, energy-saving lamps, and LED lighting. The maximum switching capacity at 230 V AC is 5000 VA (AC1) and 1000 VA (AC15), with load capacity for incandescent and halogen lamps up to 1000 W, fluorescent lamps with electronic ballast (EVG) up to 400 W, and with magnetic ballast (KVG) up to 360 W. LED lighting at 230 V AC can be switched up to 200 W. Switching capacity for low-voltage halogen lamps or LED with EVG is 200 W, and with KVG is 400 W.
Functions and Features in Detail
The device is equipped with a test button, enabling visual verification of functionality without interrupting the power supply. The contacts are designed as bridge contacts, with the NO contact having a contact gap of at least 3 mm and the NC contact at least 1.5 mm. The coil is rated for an operating voltage of 24 V DC, with a rated power of 1.25 W and a resistance of 460 Ohm. The coil is designed for AC/DC actuation via internal circuitry, ensuring vibration-free and reliable operation. A varistor is integrated at the input for protective circuitry, suppressing overvoltages.
Technology Explained Simply
The reinforced insulation between coil and contacts ensures high electrical safety and prevents unwanted sparking or short circuits. The protection rating IP 20 means the device is protected against access with fingers or similar objects, but not against dust or water. It is therefore intended for indoor use, not for outdoor applications. The ambient temperature range for operation is between –25 °C and +50 °C. The mechanical life is 2 million switching operations, and the electrical life under AC-7a load is 30,000 switching operations. The pickup and drop-out time are 30 ms and 20 ms, respectively.
Compatibility and Accessories
The relay is designed for mounting on a 35 mm support rail (according to EN 60715). It can be extended with a 6 A auxiliary switch, which can be mounted laterally on the device. As suitable accessories, the spacing piece 022.09 is offered, allowing better positioning during dense mounting. The coil is rated for 24 V DC, making it suitable for control systems in industrial or building automation applications.
Mounting and Installation
Mounting is done by inserting into a 35 mm support rail. The test button allows for easy functional testing during operation. The width of the device is 17.5 mm, making it suitable for use in compact control panels.
Operational Advantages
The relay offers high switching capacity with low coil power consumption. The use of AgSnO2 contacts ensures long service life under high inrush currents, especially with lamp loads. The vibration-free actuation and integrated protective circuitry increase reliability. The mechanical indicator and test button simplify maintenance and diagnostics. Compliance with the standard EN 61095:2009-11 and the fire behavior standard EN 45545-2 + A1:2016 for rail vehicles demonstrates suitability for demanding applications.