The installation relay of Finder's series 22, type 22.23.9.012.4000, is a mounting device for installation on a 35 mm support rail, commonly used in electrical installations. It features one normally open (NO) contact and one normally closed (NC) contact, designed for a continuous current of 20 A at a rated voltage of 250 V AC. The device is specifically designed for use in installations where reliable switching functionality for various load types is required, such as in lighting technology, pump control, or lighting control for bathrooms, offices, or hotel rooms. The contact materials are made of AgSnO₂, ensuring high switching durability under high inrush currents, particularly with lamp loads. The switching capacity is 5000 VA at 230 V AC in AC1 operation and 1000 VA in AC15 operation. It can switch incandescent and halogen lamps up to 1000 W, fluorescent lamps with EVG up to 400 W, energy-saving lamps up to 200 W, LED lamps (230 V AC) up to 200 W, as well as NV halogen lamps or LED with EVG up to 200 W and with KVG up to 400 W. The coil is designed for 12 V DC, has a rated power of 1.25 W and a resistance of 115 Ohm. The relay width is 17.5 mm, enabling compact mounting in standard installation switchboards. An integrated test button allows manual verification of the switching function. The protection class IP 20 safeguards against contact with moving parts and is suitable for use in enclosed switch cabinets.
Applications
The relay is designed for use in electrical installations, particularly in areas where safe and reliable switching functionality for various load types is required. Typical application fields include control of lighting systems in bathrooms, offices, hotels, or parking garages, pump control in heating or air conditioning systems, and control of street and parking lot lighting. The robust construction and ability to handle high inrush currents with lamp loads make it especially suitable for applications with frequent switching operations.
Functions and Equipment in Detail
The device features two contacts: one normally open (NO) and one normally closed (NC), configured as bridge contacts. The contact gap is at least 3 mm for the NO contact and at least 1.5 mm for the NC contact. The internal wiring enables hum-free actuation via both AC and DC. A varistor is integrated at the input, serving as protective circuitry to suppress overvoltages. The reinforced insulation between coil and contacts increases safety and prevents unwanted electrical coupling. The mechanical indicator and integrated LED indicator (optional) enable visual monitoring of the switching state. The relay complies with standard EN 61095:2009-11 and is suitable for use in rail vehicles according to EN 45545-2 + A1:2016, indicating high fire safety requirements.
Technology Explained Simply
The relay coil is operated with 12 V DC and pulls the armature when current flows, thereby closing or opening the contacts. The rated power of 1.25 W and resistance of 115 Ohm determine the power consumption and thermal load. Switching capacities depend on the load type: for purely resistive loads (AC1), the maximum switching capacity is 5000 VA; for inductive loads (AC15), it is 1000 VA. The AgSnO₂ contact materials are particularly suitable for high inrush currents, such as those occurring with lamps, and prevent contact welding. The test button allows manual function verification without having to disconnect the control voltage.
Compatibility and Accessories
The relay is designed for mounting on a 35 mm support rail (EN 60715) and can be extended with suitable accessories. An appropriate accessory is the spacing piece 022.09, which enables better positioning or spacing during installation. Expansion with a 6 A auxiliary switch is possible, with options for 1 NO + 1 NC or 2 NO contacts. These auxiliary switches can be mounted laterally on the relay, enabling flexible adaptation to specific applications.
Mounting and Installation
Mounting is done on a standard 35 mm support rail, commonly used in electrical installations. The width of 17.5 mm allows compact placement in switchboards. Installation requires no special tools; the device is simply clicked onto the rail. The test button can be used during commissioning or maintenance to check functionality.
Operational Advantages
The relay offers high switching durability under lamp loads, achieved through the AgSnO₂ contact material. Hum-free actuation via AC/DC ensures quiet operation. The integrated protective circuitry with varistor protects the device against overvoltages. The mechanical and LED indicators enable easy status monitoring. The protection class IP 20 is suitable for use in enclosed switch cabinets, preventing direct contact with moving parts. Compliance with standards EN 61095 and EN 45545-2 also makes it suitable for use in rail vehicles. The service life is 2 million mechanical switching operations and 30,000 electrical switching operations (AC-7a), ensuring high reliability over a long period. The ambient temperature range of –25 °C to +50 °C allows use in a wide range of environments, from air-conditioned rooms to outdoor installations with low thermal stress.