Further information for Finder 222182304000 relay 230 VAC 20 A test button
General
Degree of protection
IP 20
Coil voltage
230 V AC
Rated power
3 VA
Coil resistance
4200 Ohm
Contact material
AgSnO2
Number of contacts
1 Normally open contact (NO)
Max. continuous current
20 A
Nominal voltage
250 V AC
Max. switching capacity AC1
5000 VA
Max. switching capacity AC15
1000 VA
Incandescent lamp load
1000 W
Fluorescent lamps with EVG
400 W
Fluorescent lamps with KVG
360 W
Energy-saving lamps
200 W
LED load
200 W
NV halogen lamps or LED with EVG
200 W
NV halogen lamps or LED with KVG
400 W
Connection type
35 mm mounting rail
Ambient temperature
-25…+50 °C
Response time
30 ms
Reset time
20 ms
Voltage strength coil/contacts
6 kV
Control
AC/DC ripple-free
Over voltage protection
Varistor (voltage-sensitive resistor)
Insulation
reinforced between coil and contacts
Norm
EN 61095:2009-11
Test button
The installation relay of the series 22 from Finder, type 22.21.8.230.4000, is a mounting device for installation on a 35 mm support rail, as commonly used in electrical installations. It is designed for controlling electrical loads in building and industrial technology applications, particularly in areas such as lighting control, pump control, or in hotel and office technology. The device features a close contact with a maximum continuous current of 20 A at 250 V AC and is equipped with contact material made of silver-tin oxide (AgSnO₂), suitable for switching loads with high inrush currents, such as those occurring with lamps and lighting fixtures. The protection class IP 20 ensures protection against finger contact and solid foreign objects, but not against water or dust, which requires indoor use.
Applications
This relay is designed for use in installations where reliable and safe switching functions are required. Typical application areas include controlling lighting systems in bathrooms, offices, or hotels, controlling pumps in heating or air conditioning systems, and actuating light sources such as incandescent lamps, halogen lamps, fluorescent lamps, energy-saving lamps, and LED modules. The specific switching capacities are adapted to the respective load type, for example, incandescent and halogen lamps up to 1000 W, fluorescent lamps with electronic ballast (EVG) up to 400 W, and LED modules up to 200 W can be switched. The actuation is performed via a coil with 230 V AC, which has a rated power of 3 VA and a resistance of 4200 Ohm.
Functions and Equipment in Detail
The relay is equipped with a test button that allows checking the contact function during operation without interrupting the entire circuit. The contact gap is at least 3 mm, ensuring a secure separation of the contacts. The internal wiring enables buzz-free actuation for both alternating and direct voltage. A varistor is integrated at the input, serving as overvoltage protection and safeguarding the coil against transient voltage spikes. The reinforced insulation between the coil and contacts enhances electrical safety and prevents unwanted sparking or short circuits.
Technology Explained Simply
The relay coil is powered by 230 V AC and generates a magnetic field that pulls the armature, thereby closing the contacts. The AgSnO₂ contact materials are particularly suitable for loads with high inrush currents, such as those occurring when lamps ignite. The switching capacity at 230 V AC is 5000 VA for load type AC1 (purely resistive load) and 1000 VA for AC15 (inductive loads such as motors). The maximum service life is 2 million mechanical switching operations and 30,000 electrical switching operations for load type AC-7a. The response time is 30 ms, and the release time is 20 ms, enabling a rapid reaction to control signals. The ambient temperature range is from -25 °C to +50 °C, allowing use in normal indoor environments and slightly air-conditioned areas.
Compatibility and Accessories
The relay is designed for mounting on a 35 mm support rail according to EN 60715. Compatible accessories available in the range include the spacing piece 022.09, which facilitates better positioning of multiple relays on the rail.
Mounting and Installation
Electrical connections are made via terminals designed for cross-sections corresponding to the rated current. The test button allows for easy functional checking during operation.
Advantages in Operation
The relay offers high operational reliability due to the use of AgSnO₂ contacts, designed for high inrush currents. The buzz-free actuation and integrated varistor ensure disturbance-free operation. The protection class IP 20 and temperature resistance from -25 °C to +50 °C enable reliable performance in typical indoor installations. The compact design with a width of 17.5 mm allows dense mounting on the rail, minimizing space requirements. Compliance with the standard EN 61095:2009-11 ensures conformity with European requirements for installation contactors.