Further information for Finder 158182300500 Dimmer 230VAC electronic 300-500W
General
Degree of protection
IP 20
Operating voltage
230 V AC
Operating range
0.8…1.1 times rated voltage
Power consumption in standby mode
0,5 W
Minimum brightness
Adjustable
Dimming speed
1,5…10 s
Working time
100 %
Minimum switching power
3 W
Maximum load power for incandescent and halogen lamps
500 W
Maximum load power for low-voltage halogen lamps via toroidal transformer
500 W
Maximum load power for low-voltage halogen lamps via iron-core transformer
500 W
Maximum load power for low-voltage halogen lamps via electronic voltage regulator
500 W
Maximum load power for dimmable energy-saving lamps
100 W
Maximum load power for dimmable LED lamps
100 W
Maximum load power for dimmable electronic transformers for 12/24 V-LED
100 W
Ambient temperature
–10…+50 °C
Connection type
cage clamps
Mounting
DIN rail 35 mm
Dimming method
phase cut and phase cut
Selector switch
for 3 lamp types, 2 operating modes
Adjustable load types
Incandescent and halogen lamps, NV halogen lamps, energy-saving lamps, LED lamps, electronic transformers
Accessories
Spacer 022.09
Memory function
Thermal protection
The Finder dimmer type 15.81.8.230.0500 is an electronic dimmer for mounting on a DIN rail, specifically designed for use in installations with various lamp types. It enables stepless brightness control of incandescent and halogen lamps, NV-halogen lamps via various transformers, dimmable energy-saving lamps, LED lamps, as well as dimmable electronic ballasts (EB) for 12/24 V LED systems. The devices are designed for an operating voltage of 230 V AC and feature a memory function that stores the last set brightness level. An integrated selector switch allows choosing between two different operating modes for three lamp types, enabling flexible adaptation to various lighting scenarios.
Applications
This dimmer is suitable for use in living rooms, hallways, bedrooms, kitchens, as well as in public facilities such as hotels, offices, and hospitals. It is particularly suitable for applications requiring variable lighting moods, for example in living and working spaces where brightness adjustment according to time of day or usage situation is desired. The integrated stairwell lighting function with pre-warning (via 0…10 V/1…10 V signal) enables a gentle dimming reduction before complete switching off, which aids orientation in hallways or stairwells.
Functions and Equipment in Detail
The dimmer features an adjustable minimum brightness level that can be adapted according to application. The minimum switching power is 3 W, enabling safe control even of small loads. The maximum load power is 500 W for incandescent and halogen lamps, as well as NV-halogen lamps via toroidal, iron-core, or electronic ballasts. For dimmable energy-saving lamps and LED lamps, the maximum power is 100 W, with dimmable electronic transformers for 12/24 V LED systems also supported up to 100 W. The duty cycle (ED) is 100 %, allowing continuous loading without restrictions.
Technology Explained Simply
The dimmer operates using phase-cut and phase-lead dimming methods, with the respective method selectable via the selector switch. The dimming speed is adjustable and ranges from 1.5 to 10 seconds. The devices are equipped with an internal thermal protection, which enhances safety in case of overload or short circuit. The connection terminals are cage terminals, ensuring a secure and reliable connection. The operating voltage is 230 V AC, with the operating range between 0.8 and 1.1 times the nominal voltage. In standby mode, the device consumes 0.5 W.
Compatibility and Accessories
The dimmer is designed for mounting on a support rail with 35 mm width (according to EN 60715). It is compatible with various lamp types, including dimmable energy-saving lamps, LED lamps, and conventional transformers. As an accessory, the spacing piece 022.09 is available, which allows better positioning when mounting multiple devices on the rail. The devices are intended for indoor use, with protection class IP 20 defining protection against contact and splashing water.
Mounting and Installation
Mounting is done on a DIN rail with 35 mm width. The cage terminals allow for easy and secure connection of the wires. The devices are designed for an ambient temperature range of –10 °C to +50 °C. Installation does not require additional tools, as the terminals are secured directly via screw connection. The connection cables must be connected according to the electrical wiring, taking polarity into account.
Advantages in Operation
The dimmer offers a gentle on/off function, which extends the lamp lifespan. The memory function enables convenient restoration of the last selected brightness level. The adjustable minimum brightness and dimming speed allow individual adaptation to the respective usage situation. The internal thermal protection increases safety and prevents overheating in case of misuse or overload. Compatibility with various lamp types and transformers makes the device flexible for use in different lighting systems.