Finder 113182300000, EAN: 8012823347837

Finder 11.31.8.230.0000 dusk switch 230 VAC 1S 16 A

Installation > Modular devices / equipment installation > Modular devices, switches, buttons, etc.

Finder 11.31.8.230.0000 dusk switch 230 VAC 1S 16 A

Lieske Part No. 405154
Mfg Part No 113182300000
EAN-Code 8012823347837
Manufacturer Finder
Here only 45,80 EUR
54,50 EUR incl. VAT

Further information for Finder 11.31.8.230.0000 dusk switch 230 VAC 1S 16 A

General
Degree of protection switchIP 20
Degree of protection light sensorIP 54
Power supply230 V AC
Max. continuous current16 A
Nominal voltage250 V AC
Switching threshold1-100 lx
Breaking to making ratio1.25
Max. switching capacity AC14000 VA
Max. switching power AC15 (230 V AC)750 VA
Built-in width17.5 mm
Number of contacts1 make contact (NO)
Light sensor includedType 011.02
Ambient temperature-20 to +50 °C
Rated power2.5 VA (50 Hz)
DIN rail35 mm
Delay time (first 3 cycles)0 s
Maximum power for incandescent and halogen lamps2000 W
Maximum power for energy-saving lamps400 W
Maximum power for LED (230 V AC)400 W
Max. power low-voltage halogen/LED lamps with EVG400 W
Max. power low-voltage halogen/LED lamps with KVG800 W
Max. power for fluorescent lamps with EVG1000 W
Max. power fluorescent lamps with KVG750 W
LED status indicatorYes
SELV isolationYes
Double insulationYes
The dusk switch of Finder's series 11, type 11.31.8.230.0000, is a device for DIN rails, used for light-dependent control of lighting systems in distribution boards. It features a 1 NO contact with a maximum continuous current of 16 A at 250 V AC and is suitable for use in residential, shop window, parking, and street lighting. The switch operates on a supply voltage of 230 V AC and is equipped with an LED status indicator that visually signals the operating state. The switching function is potential-free, enabling flexible integration into existing circuits.

Applications include particularly those requiring automatic, light-controlled lighting, such as in residential buildings, commercial facilities, parking garages, or public institutions. The switch responds to ambient lighting and automatically turns on the connected lighting when light intensity falls below a preset threshold, and turns it off again when ambient lighting is sufficient. This contributes to energy saving and automation of lighting systems.

Functions and equipment in detail include an adjustable switching threshold ranging from 1 to 100 Lux, which can be adapted according to the application. The switching function operates with an off-to-on ratio of 1.25:1, meaning the lighting is switched off at 100 Lux and only switched back on at 75 Lux (100 / 1.25). This prevents frequent, unwanted switching due to slight fluctuations in light conditions. The switch supports various load types, including incandescent and halogen lamps up to 2000 W, energy-saving lamps and LED lamps (230 V AC) up to 400 W, and fluorescent lamps with electronic ballast (EB) up to 1000 W. When using conventional ballasts (CB), the maximum power for fluorescent lamps is 750 W. For NV halogen lamps or LED lamps with EB, the maximum power allowed is 400 W; with CB, it is 800 W.

Technology explained simply shows that the switch features SELV isolation between the output contact and the supply voltage, providing additional safety. The double insulation between the light sensor and the supply voltage increases electrical safety. The integrated light sensor is designed as an external outdoor sensor type 011.02, included in the packaging and featuring a protection rating of IP 54, making it suitable for outdoor use. The switching function is performed via a separate sensor that measures ambient lighting and transmits the switching command to the switch.

Compatibility and accessories include the use of the outdoor sensor type 011.02, which is included in the delivery. Alternatively, an inbuilt sensor type 011.03 is available, featuring a protection rating of IP 67 and suitable for installation in enclosed enclosures. The switch is designed for mounting on a support rail with a width of 35 mm (according to EN 60715). The mounting width is 17.5 mm.

Mounting and installation is carried out by installing the device in a distribution box on a DIN rail. Installation is facilitated by a pre-set delay time of 0 seconds during the first three switching cycles, simplifying testing and adjustment of the switching function during commissioning. The switching function is normalized after installation.

Operational advantages include energy saving through automatic lighting control, reduction of operating costs, and minimization of maintenance work. The low power consumption of 2.5 VA (50 Hz) or 0.9 W at 230 V AC contributes to efficiency. The switch is designed for an ambient temperature range of –20 °C to +50 °C, enabling broad application in various climatic conditions. The electrical life is 100,000 switching operations under AC1 operation.

The switch is equipped with cadmium-free contact material (AgSnO₂) and a cadmium-free light sensor, enhancing environmental compatibility. The protection rating of the switch itself is IP 20, while the integrated outdoor sensor has IP 54, protecting it against dust and splashing water.

Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/405154
qrcode für Finder 11.31.8.230.0000 dusk switch 230 VAC 1S 16 A