Further information for Finder 113100240000 dusk switch 24 V AC/DC 1S
General
Degree of protection
IP 20
Degree of protection external sensor
IP 54
Supply voltage
12–24 V AC/DC
Nominal voltage
250 V AC
Max. continuous current
16 A
Max. switching capacity AC1
4000 VA
Max. switching capacity AC15
750 VA
Switching threshold
1–100 lx
Breaking to making ratio
1,25
Built-in width
17,5 mm
Contact type
1 make contact (NO)
Operation temperature
-20…+50 °C
Lamp load incandescent and halogen lamps
2000 W
Lamp load energy-saving lamps
400 W
Lamp load LED (230 V AC)
400 W
Lamp load low-voltage halogen lamps or LED with external ballast
400 W
Lamp load low-voltage halogen lamps or LED with integrated ballast
800 W
Lamp load fluorescent lamps with external ballast
1000 W
Lamp load fluorescent lamps with integrated ballast
750 W
Minimum switching load
1000 mW
Permissible contact load
incandescent and halogen lamps 2000 W, energy-saving lamps 400 W, LED 400 W, NV halogen lamps or LED with EVG 400 W, NV halogen lamps or LED with KVG 800 W, fluorescent lamps with EVG 1000 W, fluorescent lamps with KVG 750 W
External sensor included
Type 011.02
LED status indicator
SELV isolation
Double insulation
The dusk switch of the Series 11 from Finder, type 11.31.0.024.0000, is a light-dependent switch for mounting in distribution boxes on DIN rail. It is used for the automatic control of lighting systems depending on ambient lighting, for example in indoor spaces, parking garages, shop windows or street lighting. The switch features a potential-free close contact with a rated current of 16 A at 250 V AC and is designed for operation with a supply voltage of 12 to 24 V AC/DC. The switching function is implemented via a separate, included outdoor sensor type 011.02 (protection rating IP 54), which measures ambient light intensity. The switching threshold is adjustable in the range of 1 to 100 Lux, allowing flexible adaptation to different operating conditions.
Applications
The dusk switch is suitable for controlling lighting systems in various areas, including indoor lighting, parking lot lighting, street lighting and shop window lighting. It enables energy-saving and automated lighting, which is activated only when ambient light intensity falls below the set threshold. The application is particularly useful in buildings with high lighting usage, where manual control would be inefficient or impractical.
Functions and Equipment in Detail
The switch features an LED status indicator, which visually signals the operating status. The switching function is performed via a close contact, achieving a maximum switching capacity of 4000 VA (AC1) and 750 VA (AC15) at 230 V AC. The permissible load for various lamp types includes incandescent and halogen lamps up to 2000 W, energy-saving lamps up to 400 W, LED lamps (230 V AC) up to 400 W, as well as NV halogen lamps or LED with EVG up to 400 W and with KVG up to 800 W. Fluorescent lamps with EVG can be switched up to 1000 W and with KVG up to 750 W. The minimum switching load is 1000 mW (10 V/10 mA). The switching function is triggered by the included outdoor sensor type 011.02, which is suitable for outdoor use.
Technology Explained Simply
The switch operates on the principle of light-dependent control: the integrated light sensor measures ambient light intensity and switches on the lighting as soon as the light intensity falls below the set threshold. The off-to-on ratio is 1.25:1, meaning the lighting turns off again when the light intensity is 25 % above the set threshold. This prevents continuous switching on and off due to minor light fluctuations. The supply voltage of 12 to 24 V AC/DC allows flexible installation, for example with a fuse or transformer. The SELV separation between output contact and supply voltage, as well as double insulation between light sensor and supply voltage, ensure high electrical safety.
Compatibility and Accessories
The dusk switch includes the outdoor sensor type 011.02 (IP 54) in the delivery scope. Additionally, compatible light sensors are available, including type 011.03 (IP 67) for built-in use, suitable for use in enclosed distribution boxes. The sensors are designed for use with dusk switches of series 11.31, 11.41, 11.42 and 11.91. The combination with an external sensor enables precise light measurement independent of the switch location.
Mounting and Installation
The switch is designed for mounting on a DIN rail (35 mm, according to EN 60715). The mounting width is 17.5 mm. Installation is carried out by inserting into the rail and subsequent electrical connection. The first three switching cycles (on and off) are programmed without delay time to simplify commissioning. The switching function is triggered by the included outdoor sensor type 011.02, which must be mounted at a suitable location outdoors.
Advantages in Operation
The dusk switch offers reliable and energy-efficient control of lighting systems. The adjustable switching threshold allows individual adaptation to the respective environment. The integrated LED indicator signals the operating status. SELV separation and double insulation increase safety. The use of cadmium-free contact material and a cadmium-free light sensor complies with environmental requirements. The switching function is designed for high electrical life (100,000 switching operations at AC1). The operating temperature ranges from -20 °C to +50 °C, enabling broad applicability in various climatic conditions.
Protection Rating and Environmental Conditions
The dusk switch itself has protection rating IP 20, making it suitable for use in enclosed distribution boxes. The included outdoor sensor type 011.02 has protection rating IP 54, protecting it against splashing water and dust and thus making it suitable for outdoor use. The operating temperature of the device ranges from -20 °C to +50 °C.
Compatibility and Accessories
The dusk switch includes the outdoor sensor type 011.02 (IP 54) in the delivery scope. Additionally, compatible light sensors are available, including type 011.03 (IP 67) for built-in use, suitable for use in enclosed distribution boxes. The sensors are designed for use with dusk switches of series 11.31, 11.41, 11.42 and 11.91. The combination with an external sensor enables precise light measurement independent of the switch location.
Mounting and Installation
The switch is designed for mounting on a DIN rail (35 mm, according to EN 60715). The mounting width is 17.5 mm. Installation is carried out by inserting into the rail and subsequent electrical connection. The first three switching cycles (on and off) are programmed without delay time to simplify commissioning. The switching function is triggered by the included outdoor sensor type 011.02, which must be mounted at a suitable location outdoors.
Advantages in Operation
The dusk switch offers reliable and energy-efficient control of lighting systems. The adjustable switching threshold allows individual adaptation to the respective environment. The integrated LED indicator signals the operating status. SELV separation and double insulation increase safety. The use of cadmium-free contact material and a cadmium-free light sensor complies with environmental requirements. The switching function is designed for high electrical life (100,000 switching operations at AC1). The operating temperature ranges from -20 °C to +50 °C, enabling broad applicability in various climatic conditions.
Protection Rating and Environmental Conditions
The dusk switch itself has protection rating IP 20, making it suitable for use in enclosed distribution boxes. The included outdoor sensor type 011.02 has protection rating IP 54, protecting it against splashing water and dust and thus making it suitable for outdoor use. The operating temperature of the device ranges from -20 °C to +50 °C.