| General |
| Degree of protection | IP 54 |
| Compatibility | Dämmerungsschalter 11.31, 11.41, 11.42, 11.91 |
| Components | sensor + metal holder |
| Switching delay | 15/30 s |
| Switching threshold | 1…100 lx |
The light sensor type 011.02 from Finder is an external sensor for light-dependent control of lighting systems. It is specifically designed for use with the dusk-to-dawn switches of series 11, particularly models 11.31, 11.41, 11.42, and 11.91. The sensor consists of the actual light detector and a metal holder that enables secure mounting. It is used as a supplement to the dusk-to-dawn switches to automatically switch lighting on or off depending on ambient light levels.
Applications
The sensor is suitable for use in outdoor installations and areas with high humidity, as it has protection rating
IP 54. This means it is dust-tight and protected against splashing water from all directions. It is therefore suitable for applications such as parking lot lighting, street lighting, shop window lighting, or house lighting, where automatic, light-dependent control is required. Outdoor use is supported by the robust construction and the protection rating.
Functions and Equipment in Detail
The light sensor 011.02 detects ambient lighting and transmits this information to the dusk-to-dawn switch, which then turns the lighting on or off. The switching threshold is adjustable on the compatible dusk-to-dawn switches, with values ranging from 1 to 100 Lux (for 11.31) or 1 to 80 Lux (for 11.41). The switching delay is 15 seconds when turning on and 30 seconds when turning off, ensuring stable and disturbance-free operation. Functions such as constant light or light permanently OFF are available on the compatible switches, while the sensor itself does not provide any additional functions.
Technology Explained Simply
The sensor operates using light-sensitive technology that measures the brightness of the environment. The measured values are transmitted to the dusk-to-dawn switch, which then decides whether to activate or deactivate the lighting. The IP 54 protection rating ensures reliable operation even under harsh environmental conditions. The use of a metal holder allows for firm and secure mounting, for example on walls or ceilings. The electrical isolation between the sensor and the supply voltage (SELV isolation) increases operational safety.
Compatibility and Accessories
The sensor is exclusively designed for the dusk-to-dawn switches of series 11 from Finder, particularly models 11.31, 11.41, 11.42, and 11.91. It is not suitable for other manufacturers or other switch types. Connection is made via the standardized interfaces of the dusk-to-dawn switches. There are no additional accessories specifically required for this sensor. Installation involves securing the sensor at the desired location and then connecting it to the dusk-to-dawn switch.
Mounting and Installation
Mounting is done using the included metal holder, which is attached at a suitable location, such as a wall or ceiling. The sensor should be installed at a location where it can detect ambient lighting without interference from direct light sources or reflections. Wiring is done via the connections of the dusk-to-dawn switch, with attention to the electrical requirements of the respective switch types. Installation is simple and does not require any special tools.
Advantages in Operation
Using the light sensor 011.02 enables energy-efficient and reliable control of lighting. Automatic adjustment to ambient light levels avoids unnecessary energy consumption. The IP 54 protection rating ensures a long service life even under harsh environmental conditions. Simple mounting and compatibility with the dusk-to-dawn switches of series 11 facilitate integration into existing installations. The low power consumption of the sensor itself further contributes to efficiency.