FHF 22492402, EAN: 4250235521443

FHF 22492402 Ex-Warning Light LED red Guard Cage

Industrial Material > Control devices / Pilot devices > Signal devices, optical and acoustic

FHF 22492402 Ex-Warning Light LED red Guard Cage

Lieske Part No. 1773496
Mfg Part No 22492402
EAN-Code 4250235521443
Manufacturer FHF
Here only 1.334,94 EUR
1.588,58 EUR incl. VAT

Further information for FHF 22492402 Ex-Warning Light LED red Guard Cage

General
Degree of protectionIP67
Operating voltage80-265 VAC
Nominal voltage230 V
Lamp typeLED
Colour of lamp hoodRed
Number of modes4
Mounting methodSurface mounting
Device groupII
Equipment category2G, 2D
Protection principled, e
Explosion sub-groupIIC
Temperature classT6
Maximum surface temperature (Dust)T80°C
Temperature range-40 - +40 °C
MTBF3952063 Operating hours
ApprovalsATEX
Housing materialSeawater-resistant aluminium
ApplicationsIndoor and outdoor use
Use in gas zone1, 2
Use in dust zone21, 22
Protective cageJa
The FHF Ex warning light type 22492402, model dSLB20, is an explosion-protected LED warning light for use in hazardous areas in accordance with ATEX directives. It is approved for use in gas zone 1 and 2 as well as in dust zone 21 and 22, and is suitable for both indoor and outdoor applications. The device features an IP67 protection rating, indicating a high level of protection against dust and water, including temporary immersion. The warning light is equipped with a protective cage to prevent mechanical damage, and the dome is red, making it suitable for warning and alarm functions.

Applications

The warning light is designed for use in explosion-hazardous areas, particularly in gas zone 1 (highly hazardous) and zone 2 (less hazardous), as well as in dust zone 21 (highly hazardous) and zone 22 (less hazardous). Approval according to ATEX and device group II with category 2G and 2D enables use in industrial facilities such as petrochemical plants, processing industries, or in handling dusts. The IP67 protection rating also makes it suitable for outdoor use, where it must be protected against precipitation, splashing water, and dust.

Functions and equipment in detail

The light offers four operating modes: steady light, flash, blink, and rotation. These modes allow flexible use depending on the alarm type and emergency situation. LED technology ensures high light output and long service life. The stated MTBF (Mean Time Between Failures) is 3,952,063 operating hours, indicating high reliability. The dome is made of glass, which optimizes light distribution, and the housing is made of seawater-resistant aluminium, ensuring corrosion protection and durability.

Technology explained simply

The protection principles d (pressure-tight) and e (increased safety clearance) ensure that in the event of an internal explosion, the pressure within the housing is contained and no flame escapes to the outside. The explosion subgroup IIC covers most flammable gases, including hydrogen and acetylene. The temperature class T6 indicates that the surface temperature of the device remains below 85 °C, which is safe for use with flammable gases having low ignition temperatures. For dust zones, the maximum surface temperature is limited to T80°C, ensuring safety in the event of dust explosions.

Compatibility and accessories

The warning light is designed for an operating voltage of 80 to 265 VAC, with a nominal voltage of 230 V. It is therefore compatible with standard industrial power supplies. The mounting is surface-mounted, allowing flexible installation on walls or equipment. Use in combination with other Ex devices is possible as long as the approvals and protection categories are compatible.

Mounting and installation

Surface mounting requires no special tools or additional mounting components. The light is directly mounted at the desired location, and the IP67 protection rating allows installation outdoors. The temperature range of -40 °C to +40 °C indicates that the device can be operated even under extreme climatic conditions.

Advantages in operation

The high MTBF and robust construction from seawater-resistant aluminium ensure a long service life and low maintenance. The four operating modes enable precise signaling of different alarm levels. The IP67 protection rating and ATEX approval guarantee safety in hazardous areas. LED technology provides high energy efficiency and low heat generation, increasing operational safety.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1773496
qrcode für FHF 22492402 Ex-Warning Light LED red Guard Cage