| General |
| Loudness | 108 dB(A) |
| Nominal voltage | 42 V |
| Type of current | AC |
| Electricity consumption | 0,3 A |
| Degree of protection (IP) | IP55 |
| Temperature range | -20 - +60 °C |
| Colour housing | Grey |
| Housing material | Plastic |
The signal horn HPW 11 42 VAC from FHF is an electromechanical signal device designed for use in dry and damp indoor environments as well as outdoors. The device serves as an acoustic warning or alarm element in industrial plants, production environments, or safety systems, where clear and loud signaling is required. The horn produces a sound level of approximately 108 dB(A), ensuring sufficient audibility even in noisy environments. The construction from impact-resistant thermoplastic (ABS) ensures mechanical robustness, while the protection rating IP55 confirms suitability for damp and dusty areas.
Applications
The signal horn is designed for industrial applications requiring acoustic signaling in indoor and outdoor environments. It is suitable, for example, for machine controls, emergency shutdowns, alarm systems, or as part of safety and warning systems in factories, warehouses, or construction sites. The IP55 protection rating allows use in environments with splashing water and dust, but not in fully waterproof or explosion-hazardous areas.
Functions and Equipment in Detail
The device features an electromechanical horn system activated by an electrical impulse. Sound emission occurs via an integrated sound horn, which directs the sound propagation and enables targeted signal transmission. The housing color is gray, allowing neutral integration into industrial environments. The housing is made of plastic (ABS), known for its mechanical strength and weather resistance.
Technology Explained Simply
The signal horn operates at a nominal voltage of 42 V AC. The current consumption is 0.3 A, representing a low energy consumption value. The operating temperature ranges from -20 °C to +60 °C, enabling use in environments with varying climatic conditions. The protection rating IP55 means the device is protected against dust and splashing water, but not against complete submersion or strong splashing. Power supply is via the mains, with the AC version designed for alternating current.
Compatibility and Accessories
The signal horn is available in AC and DC versions, with the variant described here designed for 42 V AC. A special version with telephone switching relay exists, but is not part of this version. Compatibility with other signaling devices or controls is given, provided the electrical connection requirements (voltage, current type) match.
Mounting and Installation
Mounting is done on a suitable wall or ceiling surface, taking into account the directional sound emission via the sound horn. Dimensions are 345 mm (height), 140 mm (width), and 133 mm (depth), allowing placement at standard mounting points. Electrical connection is made via the designated terminal clamps, with correct polarity and adherence to nominal voltage required.
Advantages in Operation
The signal horn offers a high sound level of 108 dB(A), audible even in noisy industrial environments. The robust ABS construction and IP55 protection rating ensure long service life in demanding environments. The low current consumption of 0.3 A reduces energy consumption, and the operating temperature range of -20 to +60 °C enables flexible use. The directional sound emission via the sound horn enhances signal effectiveness in specific directions.