| General |
| Degree of protection | IP66 |
| Explosion sub-group | IIC |
| Temperature class | T6 |
| Device group | II |
| Equipment category | 2G |
| Protection principle | e, m |
| Approvals | ATEX, GOST R |
| Application range | Ex-zone gas 1, 2 |
| Signal type | Acoustic |
| Loudness | ca. 90 dB(A) |
| Temperature range | -20 - +40 °C |
| Housing material | Seawater-resistant aluminium |
| Cap | Polycarbonate |
| Power supply | From telephone |
| Integrated relay | Telephone call relay |
The FHF ExII-telephone secondary call annunciator type 21184206 is an explosion-protected signalling device for use in hazardous areas of Ex zone Gas 1 and 2. The device serves as an acoustic alarm, activated via an integrated telephone call relay, and can thus be used in industrial facilities with telephone connection for signalling emergencies or alarms. It is designed for indoor and outdoor use and meets protection class IP66, ensuring dust- and water-tight conditions even under heavy splashing water and short-term submersion. The housing construction is made of seawater-resistant aluminium, enabling use in marine or corrosive environments. The transparent dome is made of polycarbonate, providing high mechanical strength and weather resistance.
Applications
This device is specifically designed for use in explosion-hazardous areas of gas zone 1 and 2, which is relevant in industry, for example, during processing of flammable gases or vapours. It is not approved for dust zones. The operating conditions include temperatures from -20 °C to +40 °C, enabling use in environments with varying climatic conditions. The IP66 protection class also makes it suitable for outdoor installations, where it must be protected against dust, water, and mechanical impacts.
Functions and Equipment in Detail
The secondary call annunciator operates acoustically and generates a signal tone with a sound pressure level of approximately 90 dB(A), ensuring sufficient audibility in industrial environments. Various signal tones are available to distinguish different alarm states visually or acoustically. The integrated telephone call relay enables control of the device via a telephone system, allowing integration into existing communication infrastructures. Power supply is directly from the telephone, so no additional power source is required.
Technology Explained Simply
The device conforms to equipment group II, category 2G, with protection principles e (increased safety) and m (massive encapsulation). The explosion sub-group IIC indicates suitability for use with all flammable gases grouped under IIC. Temperature class T6 means the device can be used in environments where the surface temperature of the device must not exceed 85 °C, to avoid exceeding the ignition temperature of surrounding gases. The ATEX and GOST R approvals confirm compliance with European and Russian safety standards.
Compatibility and Accessories
The device is designed for use in telephone systems that allow power supply via the telephone cable. It is not intended for dust zones, so it must not be used in areas with explosion-hazardous dust. Compatibility is limited to systems that can work with the integrated telephone call relay.
Mounting and Installation
Mounting is carried out at a suitable location indoors or outdoors, with the IP66 protection class allowing installation even in damp or dusty environments. Dimensions are 137 mm (height), 150 mm (width), and 117 mm (depth), resulting in a compact design. Mounting is typically done on a wall or support, with electrical connection via the telephone cable.
Operational Advantages
The use of the FHF ExII-telephone secondary call annunciator 21184206 provides reliable signalling in explosion-hazardous areas. The integrated telephone control enables easy integration into existing communication systems. The robust construction from seawater-resistant aluminium and polycarbonate ensures long service life even under harsh environmental conditions. The IP66 protection class and temperature resistance from -20 °C to +40 °C significantly extend the range of applications. The sound pressure level of approximately 90 dB(A) ensures sufficient audibility of the signal.