Evn Elektro-Vertrieb Nuernberg KTGC-200-SR, EAN: 4037293008723

Evn Elektro-Vertrieb Nuernberg KTGC-200-SR media converter 10G SFP MM 300 m

Evn Elektro-Vertrieb Nuernberg KTGC-200-SR media converter 10G SFP MM 300 m

Lieske Part No. 2128836
Mfg Part No KTGC-200-SR
EAN-Code 4037293008723
Manufacturer Evn Elektro-Vertrieb Nuernberg
Here only 308,75 EUR
367,41 EUR incl. VAT

Further information for Evn Elektro-Vertrieb Nuernberg KTGC-200-SR media converter 10G SFP MM 300 m

General
Operating voltage100-240 VAC
RJ45 port1x 10/5/2.5/1 Gigabit
SFP slot1x 10/5/2.5/1 Gigabit
SFP moduleMM 300m 10G SFP+
Wavelength1310 nm
Transmission rate10/5/2.5/1 Gigabit
ConversionTransparent
Type of deviceunmanaged
The Evn Elektro-Vertrieb Nuernberg media converter type KTGC-200-SR is an unmanaged device for transmitting network data between copper and fiber optic cables. It features an RJ45 port and an SFP slot to support various transmission rates from 10 Gbit/s down to 1 Gbit/s. The device acts as a bridge between Ethernet networks using different transmission media and enables transparent data conversion without altering the protocol. It is designed for use in local area networks (LAN) where a flexible and reliable connection between copper and fiber optic infrastructure is required.

Applications

The media converter is suitable for networks requiring a connection between a copper network (e.g., via Cat 6 or Cat 6a) and a fiber optic network (e.g., multimode). Typical use cases include extending network connections over longer distances, where copper cables are no longer sufficient due to signal loss, or integrating existing fiber optic lines into a copper-based network. The support for multiple transmission rates (10/5/2.5/1 Gbit/s) makes the device flexible for use in environments with varying bandwidth requirements.

Functions and Features in Detail

The device features an RJ45 port for connecting to copper cables (e.g., Cat 5e, Cat 6) and an SFP slot that accepts SFP and SFP+ modules. The SFP modules enable connection to fiber optic lines. The integrated 10G SFP+ module for multimode (MM) supports a range of up to 300 meters at a wavelength of 1310 nm. Transparent conversion ensures data packets are transmitted without modification, guaranteeing compatibility with existing networks. The device functions as unmanaged, meaning no configuration via web interface or CLI is required — it operates automatically in plug-and-play mode.

Technology Explained Simply

The media converter converts the electrical signals from the RJ45 port into optical signals for the SFP slot and vice versa. This occurs without interfering with the data packets, so the network architecture does not need to be changed. Support for multiple transmission rates (10/5/2.5/1 Gbit/s) is automatic, with the device selecting the highest common speed between connected devices. The use of SFP+ modules for multimode fiber enables high bandwidth over medium distances. The wavelength of 1310 nm is typical for multimode fibers and ensures stable transmission. The integrated power supply with a voltage range of 100 to 240 VAC allows use in various countries and power grids.

Compatibility and Accessories

The media converter is compatible with SFP and SFP+ modules. The delivery includes the 10G SFP+ module for multimode (MM) with a 300 m range and 1310 nm wavelength. Transparent conversion allows connection to any device with an RJ45 port or SFP slot, provided speed compatibility is ensured. No additional accessories are required to operate the device, as the power supply is already integrated.

Mounting and Installation

Installation is performed by simply connecting the RJ45 cable to the corresponding port and inserting the SFP module into the SFP slot. Power supply is provided via the integrated power supply, which is connected to a power outlet. Device functions are automatically activated once power supply and cable connections are established. No manual configuration is required.

Operational Advantages

Using the media converter enables flexible network expansion without modifying existing infrastructure. Transparent conversion ensures seamless integration into existing networks. Support for multiple transmission rates increases flexibility, and the integrated power supply reduces the number of required external components. The unmanaged architecture reduces maintenance effort, as no configuration is needed. The use of multimode fiber with a 300 m range provides a powerful solution for medium distances in LAN environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2128836
qrcode für Evn Elektro-Vertrieb Nuernberg KTGC-200-SR media converter 10G SFP MM 300 m