| General |
| Manufacturer | ESL |
| Number of poles | 3 |
| Nominal current | 20 A |
| Characteristic | C |
| Degree of protection | IP20 |
| Terminal clamp | patented pressure plate |
| Maximum conductor cross-section | 35 mm² |
| System | Compact |
| Approvals | DIN VDE 0100-430, DIN VDE 0100-530, DIN VDE 0641-11, IEC/EN 60898-1, DIN VDE 0660-101, IEC/EN 60947-2, UL1077 |
The S203-C20 circuit breaker from ESL is a 3-pole circuit protection switch from the S 200 series, specifically designed for use in the Compact system. It provides protection for cables and lines against overload and short circuit in accordance with standards DIN VDE 0100-430 and DIN VDE 0100-530. The device complies with construction regulations DIN VDE 0641-11 or IEC/EN 60898-1, as well as DIN VDE 0660-101 or IEC/EN 60947-2, and is also UL1077-certified, highlighting its suitability for worldwide use. The C-characteristic ensures balanced tripping behavior under transient loads and provides protection suitable for typical consumer installations.
Applications
The S203-C20 is intended for use in electrical distributions within low-voltage installations, particularly in residential and commercial buildings as well as industrial facilities. It is designed for mounting in modular devices within the Compact system, where its modular design enables flexible integration into existing switchgear installations. The protection function is especially important in applications requiring high availability and safety.
Functions and Equipment in Detail
A central feature of the device is the patented connection terminal, which enables simple and secure contact. The terminal is operated via a pressure plate, accelerating installation while ensuring a reliable connection. The cable connection opening is positioned above the phase bar connection opening, providing better visibility during wiring. This simplifies work for electricians and reduces error sources. Conductor cross-sections up to 35 mm² can be connected directly, with the terminal equipped with insulation rated to protection class IP20.
Technology Explained Simply
The C-characteristic means that the switch trips within seconds when the load reaches 5 to 10 times the rated current. For lower overloads (e.g., 1.13 times the rated current), tripping occurs only after a longer period, allowing for short-term current surges. The IP20 protection class prevents contact with fingers and protects against solid foreign objects larger than 12.5 mm in diameter, but does not protect against water or dust. This protection class is suitable for indoor use where no special environmental conditions apply.
Compatibility and Accessories
The device is designed for use in the Compact system and can be combined with various accessories to optimize installation. These include busbars such as PS3/12, PS3/6, PS3/9, as well as the 3-phase busbar for cutting with a 10 mm² cross-section. These enable flexible and secure connections between individual switches. Additionally, a three-phase set 710SPM with 10 mm² and a length of 1056 mm is available, also designed for the Compact system.
Mounting and Installation
Mounting is carried out in standard distribution enclosures within the Compact system. The modular design allows for easy installation in modular devices. The connection terminal is designed for direct connection to conductors up to 35 mm², with insulation rated to IP20 ensuring safety during installation. The positioning of the connection openings ensures clear and error-free wiring.
Advantages in Operation
The S203-C20 offers high reliability through triple quality inspection before delivery. The patented connection terminal reduces installation time and increases connection safety. The C-characteristic provides balanced protection, effective both for short-term load peaks and sustained overloads. Compatibility with the Compact system and the extensive range of accessories enables flexible and scalable installation in various applications.